Main Memory Page Read | Read | Main Memory Page to Buffer | Buffer to Main Memory Page | Buffer 1 Write | Buffer 2 Write | ||||||||
Transfer | Compare | Erase & Write | Write | ||||||||||
Buf1 | Buf2 | Buf1 | Buf2 | Buf1 | Buf2 | Buf1 | Buf2 | Buf1 | Buf2 | ||||
52H | 54H | 56H | 53H | 55H | 60H | 61H | 83H | 86H | 88H | 89H | 84H | 87H | |
0 | 0 | 0 | 0 | 0 | 0 | 1 | 1 | ||||||
1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | ||||||
0 | 0 | 0 | 0 | 1 | 1 | 0 | 0 | ||||||
1 | 1 | 1 | 1 | 0 | 0 | 0 | 0 | ||||||
0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | ||||||
0 | 1 | 1 | 0 | 1 | 0 | 0 | 1 | 1 | |||||
1 | 0 | 1 | 1 | 0 | 0 | 0 | 0 | 1 | |||||
0 | 0 | 0 | 1 | 1 | 0 | 1 | 0 | 1 | |||||
r | X | X | r | r | r | X | X | ||||||
r | X | X | r | r | r | X | X | ||||||
r | X | X | r | r | r | X | X | ||||||
PA11 | X | X | PA11 | PA11 | PA11 | X | X | ||||||
PA10 | X | X | PA10 | PA10 | PA10 | X | X | ||||||
PA9 | X | X | PA9 | PA9 | PA9 | X | X | ||||||
PA8 | X | X | PA8 | PA8 | PA8 | X | X | ||||||
PA7 | X | X | PA7 | PA7 | PA7 | X | X | ||||||
PA6 | X | X | PA6 | PA6 | PA6 | X | X | ||||||
PA5 | X | X | PA5 | PA5 | PA5 | X | X | ||||||
PA4 | X | X | PA4 | PA4 | PA4 | X | X | ||||||
PA3 | X | X | PA3 | PA3 | PA3 | X | X | ||||||
PA2 | X | X | PA2 | PA2 | PA2 | X | X | ||||||
PA1 | X | X | PA1 | PA1 | PA1 | X | X | ||||||
PA0 | X | X | PA0 | PA0 | PA0 | X | X | ||||||
BA8 | BFA8 | BFA8 | X | X | X | BFA8 | BFA8 | ||||||
BA7 | BFA7 | BFA7 | X | X | X | BFA7 | BFA7 | ||||||
BA6 | BFA6 | BFA6 | X | X | X | BFA6 | BFA6 | ||||||
BA5 | BFA5 | BFA5 | X | X | X | BFA5 | BFA5 | ||||||
BA4 | BFA4 | BFA4 | X | X | X | BFA4 | BFA4 | ||||||
BA3 | BFA3 | BFA3 | X | X | X | BFA3 | BFA3 | ||||||
BA2 | BFA2 | BFA2 | X | X | X | BFA2 | BFA2 | ||||||
BA1 | BFA1 | BFA1 | X | X | X | BFA1 | BFA1 | ||||||
BA0 | BFA0 | BFA0 | X | X | X | BFA0 | BFA0 | ||||||
Opcode: 57H
After
Check the device status by sending opcode 57H and then clocking bit 7 (the MSB) of the status register back out on the SO pin. If bit 7 is a 1, then the device is not busy and is ready to accept the next command. If bit 7 is a 0, then the device is in a busy state.
The user can continuously poll bit 7 of the status register by stopping SCK once bit 7 has been output. The status of bit 7 will continue to be output on the SO pin, and once the device is no longer busy, the state of SO will change from 0 to 1.
file: /Techref/atmel/at45d081.htm, 9KB, , updated: 1999/6/25 06:41, local time: 2024/12/1 02:10,
3.133.157.133:LOG IN
|
©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions? <A HREF="http://massmind.org/Techref/atmel/at45d081.htm"> Atmel AT45D081 1Mbytes SPI flash memory</A> |
Did you find what you needed? |
Welcome to massmind.org! |
Welcome to massmind.org! |
.