B2C programs require a set of supporting files to create an application. Fortunately for you the B2Cbuild process handles this for you. You may never have to look at these files.
DO THIS |
At the MS DOS command prompt type "build hello.b2c". If any errors occur you will see the word "ERROR", but if all goes well you should see a line which says something like "Done 7 files." In the event of an error, examine the error line. It will show the source file followed by a line number in parenthesis, followed by the error. For Example:
hello.b2c(2) – Parse error
Indicates an error in line two of hello.b2c. A parse error is some sort of spelling error. |
| file: /Techref/cybiko/b2c/ch5.htm, 1KB, , updated: 2008/6/13 14:39, local time: 2024/11/28 15:43,
3.138.114.140:LOG IN
|
| ©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions? <A HREF="http://massmind.org/Techref/cybiko/b2c/ch5.htm"> cybiko b2c ch5</A> |
| Did you find what you needed? |
Welcome to massmind.org! |
Welcome to massmind.org! |
.