AAA 00110111
Adjusts the sum of two unpacked BCD values to create an unpacked BCD result. The AL register is the implied source and destination operand for this instruction. The AAA instruction is only useful when it follows an ADD instruction that adds (binary addition) two unpacked BCD values and stores a byte result in the AL register. The AAA instruction then adjusts the contents of the AL register to contain the correct 1-digit unpacked BCD result.
If the addition produces a decimal carry, the AH register is incremented by 1, and the CF and AF flags are set. If there was no decimal carry, the CF and AF flags are cleared and the AH register is unchanged. In either case, bits 4 through 7 of the AL register are cleared to 0.
IF ((AL AND 0FH) > 9) OR (AF = 1) THEN AL ¬ (AL + 6); AH ¬ AH + 1; AF ¬ 1; CF ¬ 1; ELSE AF ¬ 0; CF ¬ 0; FI; AL ¬ AL AND 0FH;
The AF and CF flags are set to 1 if the adjustment results in a decimal carry; otherwise they are cleared to 0. The OF, SF, ZF, and PF flags are undefined.
None.
file: /Techref/intel/x86/inst/aaa.htm, 1KB, , updated: 2007/6/15 16:45, local time: 2024/8/31 19:32,
3.135.204.13:LOG IN
|
©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions? <A HREF="http://massmind.org/Techref/intel/x86/inst/aaa.htm"> Intel, x86 Processor, AAA Instruction</A> |
Did you find what you needed? |
Welcome to massmind.org! |
Ashley Roll has put together a really nice little unit here. Leave off the MAX232 and keep these handy for the few times you need true RS232! |
.