Tony Nixon [sales at picnpoke.com] of ICmicro's says:
Title "Your Program" ; list P = 16F877 ; include "P16f877.inc" ; ; ------------------ ; CONFIGURATION FUSE ; ------------------ ; __CONFIG _CP_OFF & _WRT_ENABLE_ON & _RC_OSC & _WDT_ON & _PWRTE_OFF & _BODEN_ON & _LVP_ON & _CPD_OFF & _DEBUG_OFF ; ; CRYSTAL SPEED = 4000000Hz ; CBLOCK 0x20 dataL ENDC ; ; ------------- ; PROGRAM START ; ------------- ; org 0x0000 ; startup = 0000h ; Start movlw 0x00 ; setup ports movwf PORTA movlw 0x00 movwf PORTB movlw 0x40 movwf PORTC movlw 0x00 movwf PORTD movlw 0x00 movwf PORTE bsf STATUS,RP0 ; RAM Page 1 movlw 0x00 movwf TRISA movlw 0x00 movwf TRISB movlw 0x80 movwf TRISC movlw 0xFF movwf TRISD movlw 0xFF movwf TRISE ; ; ------------------------- ; SET ANALOG/DIGITAL INPUTS ; ------------------------- ; movlw 0x06 ; all digital movwf ADCON1 ; ; ------------------------------------ ; SET BAUD RATE TO COMMUNICATE WITH PC ; ------------------------------------ ; Boot Baud Rate = 19200, No Parity, 1 Stop Bit ; movlw 0x0C ; 19200 baud movwf SPBRG movlw b'00100100' ; brgh = high (2) movwf TXSTA ; enable Async Transmission, set brgh movlw b'10010000' ; enable Async Reception bcf STATUS,RP0 ; RAM Page 0 movwf RCSTA ; ; ------------------------------------ ; PROVIDE A SETTLING TIME FOR START UP ; ------------------------------------ ; clrf dataL settle decfsz dataL,F goto settle ; movf RCREG,W movf RCREG,W movf RCREG,W ; flush receive buffer Loop call Receive ; wait for a char movwf TXREG ; echo data back to sender goto Loop ; ; ---------------------------- ; RECEIVE CHARACTER FROM RS232 ; ---------------------------- ; This routine does not return until a character is received. ; Receive btfss PIR1,RCIF ; (5) check for received data goto Receive ; movf RCREG,W return ; ; ------------------------------------ ; WAIT UNTIL RS232 IS FINISHED SENDING ; ------------------------------------ ; TransWt bsf STATUS,RP0 WtHere btfss TXSTA,TRMT ; (1) transmission is complete if hi goto WtHere ; clrf STATUS ; RAM Page 0 return ; ; end
Questions:
Comments:
file: /Techref/microchip/16f877/setup.htm, 3KB, , updated: 2010/11/16 21:59, local time: 2024/12/13 03:45,
18.97.14.84:LOG IN
|
©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions? <A HREF="http://massmind.org/Techref/microchip/16f877/setup.htm"> Setting up a 16F87x </A> |
Did you find what you needed? |
Welcome to massmind.org! |
Welcome to massmind.org! |
.