please dont rip this site

Microchip IO Dev Lcd Lcdterminal.asm

  title  "LcdTerminal 16F873 or 16F628"

;  
;
;  Hardware Notes:
; 20 MHz osc 115200 baud
;
;  Ted Rossin:  04-13-2003
;	            06-05-2003

; ************************************************
; **									        **
; ** Special characters:                        **
; **   0x01  Home                               **
; **   0x08  Back space                         **
; **   0x09  Tab                                **
; **   0x0a  Line feed ^J                       **
; **   0x0c  Form feed (Clear display)          **
; **   0x0d  Carriage return ^M                 **
; **   0x10  Move to X,Y (X and Y are the       **
; **         next two characters                **
; **   0x1b  Escape                             **
; **           0x00 Disable cursor              **
; **           0x01 Enable underscore cursor    **
; **           0x02 Enable block cursor         **
; **           0x03 Scroll display left         **
; **           0x04 Scroll display right        **
; **           0x05 Enable Display              **
; **           0x06 Disable Display             **
; **           0x07 Raw LCD controller command  **
; **           0x08 Disable vertical scroll     **
; **           0x09 Enable vertical scroll(default)**           
; **           0x10 Write Custom character 0    **
; **                Next 8 bytes form character **
; **           0x11 Write Custom character 1    **
; **                Next 8 bytes form character **
; **           0x12 Write Custom character 2    **
; **                Next 8 bytes form character **
; **           0x13 Write Custom character 3    **
; **                Next 8 bytes form character **
; **           0x14 Write Custom character 4    **
; **                Next 8 bytes form character ** 
; **           0x15 Write Custom character 5    **
; **                Next 8 bytes form character ** 
; **           0x16 Write Custom character 6    **
; **                Next 8 bytes form character ** 
; **           0x17 Write Custom character 7    **
; **                Next 8 bytes form character **  
; **   0x80 Display custom character 0          **
; **   0x81 Display custom character 1          **
; **   0x82 Display custom character 2          **
; **   0x83 Display custom character 3          **
; **   0x84 Display custom character 4          **
; **   0x85 Display custom character 5          **
; **   0x86 Display custom character 6          **
; **   0x87 Display custom character 7          **
; **                                            **
; ************************************************

	LIST R=DEC

	; Used for development
	
#ifdef __16F873

#include "p16f873.inc"

#define LCD_RS		PORTC,2
#define LCD_E		PORTC,3
#define BAUD_SELECT PORTC,4 

    __CONFIG _CP_OFF & _DEBUG_OFF & _HS_OSC & _PWRTE_ON  & _WDT_OFF & _LVP_OFF & _WRT_ENABLE_ON & _BODEN_ON & _CPD_OFF

#endif

	; Used for product
	
#ifdef __16F628

#include "P16f628.inc"

#define LCD_RS		PORTA,2
#define LCD_E		PORTA,3
#define BAUD_SELECT PORTA,5  

#define _CPD_OFF	0x3fff  ; Missing define
#define _CPD_ON		0x3eff  ; Missing define
 	__CONFIG _HS_OSC & _CP_OFF & _CPD_OFF & _LVP_OFF & _BODEN_OFF & _MCLRE_OFF & _PWRTE_ON & _WDT_OFF

#endif


#define PRESCALE_TIMER_MODE	0xD0
#define PRESCALE_VALUE	(PRESCALE_TIMER_MODE | 0x8)	; Set prescaler to 1/1

#define TERM_HOME   0x01    ; SOH
#define TERM_BS     0x08    ; BS
#define TERM_TAB    0x09    ; HTAB
#define TERM_LF     0x0a    ; LF (Line feed) ^J
#define TERM_CLEAR  0x0c    ; FF
#define TERM_CR     0x0d    ; CR (Carriage return) ^M
#define TERM_POS    0x10    ; Move to X,Y
#define TERM_ESC    0x1b    ; More fun ahead

#define ESC_DISABLE_CURSOR      0x00
#define ESC_ENABLE_UNDER_CURSOR 0x01
#define ESC_ENABLE_BLOCK_CURSOR 0x02
#define ESC_SCROLL_LEFT         0x03
#define ESC_SCROLL_RIGHT        0x04
#define ESC_ENABLE_DISPLAY      0x05
#define ESC_DISABLE_DISPLAY     0x06
#define ESC_RAW_COMMAND         0x07
#define ESC_DISABLE_VERT_SCROLL 0x08
#define ESC_ENABLE_VERT_SCROLL  0x09
#define ESC_WRITE_CUSTOM        0x10
#define DISPLAY_CUSTOM_MASK     0xf8
#define DISPLAY_CUSTOM_VALUE    0x80

#define STATE_NORMAL        0
#define STATE_WAIT_X        1
#define STATE_WAIT_Y        2
#define STATE_WAIT_COMMAND  3

#define FLAGS_DISABLE_VERT_SCROLL    0


	;  RAM

#define FIFO_START  0xA0
#define FIFO_END    0xEF

#define REG_START	0x020

	cblock	REG_START
	    _w, _status, _fsr   ;  Context Register Save Values
	    Amount			 
	    DelayL,DelayH
	    LcdX,LcdY
	    Tmp,Tmp2
        Loop1
        Count
        State
        Flags
        LastRS232Byte
        CgRamAddr
	    Param:2			    ; Parameters
                            ; Input FIFO
        Empty
        FifoWritePtr
        FifoReadPtr
                            ; Scroll buffer
        ScrollBuffer1:20
        ScrollBuffer2:20
        ScrollBuffer3:20
 	endc

 	
	org     0

Startup:
	nop
	nop
	nop
	goto   Main


; ************************************************
; **									        **
; ** Interrupt handler	                        **
; **									        **
; ************************************************
      
	org     4
  
Int:
  	movwf	_w		    ; Save Context Registers
  	movf	STATUS, w	; - Assume TMR0 is the only enabled Interrupt
  	movwf	_status
	movf	FSR,w
	movwf	_fsr
	
    bcf	    PIR1,RCIF	    ; Clear the recieved data flag
                            ; Write byte to FIFO to full check
    movf    FifoWritePtr,w
    movwf   FSR
    movf	RCREG,w
    movwf   INDF
    bcf     Empty,0         ; Clear the empty flag
    incf    FifoWritePtr,f
    movf    FifoWritePtr,w
    sublw   FIFO_END
    btfss	STATUS,Z		; Skip if need to wrap write pointer
	  goto IntEnd
    movlw   FIFO_START
    movwf   FifoWritePtr

IntEnd:
	movf	_fsr,w		; Restore registers
	movwf	FSR
  	movf   _status, w	
  	movwf  STATUS
  	swapf  _w, f
  	swapf  _w, w
    retfie


; ************************************************************************
; **									                                **
; ** GetRS232Byte: Waits for a byte to be received and then returns it	**
; **               in w.						                        **
; **									                                **
; ************************************************************************

GetRS232Byte:
	btfsc	Empty,0	        ; Wait for byte to show up.
	  goto	$-1
    movf    FifoReadPtr,w   ; Fetch byte from FIFO
    movwf   FSR
    movf    INDF,w
    movwf   Tmp

    incf    FifoReadPtr,f
    movf    FifoReadPtr,w
    sublw   FIFO_END
    btfss	STATUS,Z		; Skip if need to wrap write pointer
	  goto GetRS232ByteEnd
    movlw   FIFO_START
    movwf   FifoReadPtr
GetRS232ByteEnd
    
    movf    FifoReadPtr,w
    subwf   FifoWritePtr,w
    btfss   STATUS,Z
      goto  GetRS232ByteSkip
    bsf     Empty,0         ; Set the empty flag
GetRS232ByteSkip
    movf    Tmp,w
	return

; ************************************************************************
; **									                                **
; ** SendRS232Byte: Waits for transmit to be ready and then sends byte	**
; **                in w to the RS-232 port				                **
; **									                                **
; ************************************************************************

SendRS232Byte:
	btfss	PIR1,TXIF
	  goto	$-1
	movwf	TXREG
	return;

; ************************************************************************
; **									                                **
; ** InitRS232:								                            **
; **	Initialize the RS-232 port for recieve interrupt operation.     **
; **									                                **
; ************************************************************************

InitRS232:
	bcf	STATUS,RP0
	bcf	STATUS,RP1		    ; Select Bank 0	
	bsf	STATUS,RP0          ; Select Bank 1 registers
#ifdef __16F873 
	bsf	TRISC^0x80,7        ; PORTC[RX] is Input
	bcf	TRISC^0x80,6        ; PORTC[TX] is Output
#else
    bsf TRISB^0x80,1        ; PORTB[RX] is Input
    bcf TRISB^0x80,2        ; PORTB{TX] is Output
#endif

    bcf	STATUS,RP0		    ; Select Bank 0
    movlw   129             ; Set baud to 9600
    btfss   BAUD_SELECT     ; Check to see if High baud rate
	 movlw	10              ; Set baud to 115200

    bsf	STATUS,RP0          ; Select Bank 1 registers
;   movlw   20              ; Set baud to 57600   
	movwf	SPBRG^0x80		; 
	movlw	(1<<TXEN)|(1<<BRGH)
	movwf	TXSTA^0x80		; Set transmit mode
    movlw	(1<<RCIE)
	iorwf	PIE1^0x80,f		; Enable receive interrupts
	bcf	STATUS,RP0		    ; Select Bank 0
	movlw	(1<<SPEN)|(1<<CREN)
	movwf	RCSTA			; Set receive mode 
    bsf     Empty,0         ; Set the empty flag

    movlw   FIFO_START
    movwf   FifoWritePtr
    movwf   FifoReadPtr
	return

    ;
    ; InitWaitTimer
    ;

InitWaitTimer:
	bcf	STATUS,RP0
	bcf	STATUS,RP1
	movlw	0x01		; timer 1 internal 1:1 prescale
	movwf	T1CON
	clrf	TMR1L
	clrf	TMR1H
	return

    ;
    ; Waitms
    ;

Waitms:
WaitmsLoop:
	bcf	T1CON,0	; Disable Timer
	movlw	255-19
	movwf	TMR1H
	movlw	255-(136-12)
	movwf	TMR1L
	bsf	T1CON,0	; Enable Timer
WaitmsInnerLoop:
	btfsc	TMR1H,7
	  goto	WaitmsInnerLoop
	decfsz	Amount,f
	  goto	WaitmsLoop
	return;

    ;
    ; Waitus
    ;

Waitus:
	bcf	T1CON,0	; Turn off timer
	movlw	5
	subwf	Amount,w
	movwf	DelayL
	bcf	STATUS,C
	clrf	DelayH
	rlf	DelayL,f
	rlf	DelayH,f
	rlf	DelayL,f
	rlf	DelayH,f
	movlw	5
	subwf	Amount,w
	addwf	DelayL,f
	btfsc	STATUS,C
	  incf	DelayH,f
			; {DelayH,DelayL} = Amount*5
	movf	DelayL,w
	sublw	255	; 255-DelayL
	movwf	TMR1L
	movf	DelayH,w
	sublw	255
	movwf	TMR1H
	bsf	T1CON,0	; Turn on Timer

	movlw	5-1
	subwf	Amount,w
	btfss	STATUS,C
	  return;	; return if Amount < 5us
WaitusLoop:
	btfsc	TMR1H,7
	  goto	WaitusLoop
	return

    ;
    
    
WriteData:

#ifdef __16F873
    movwf   PORTB
#else
        ; Swizzle byte data between PORT A and B
        ; {PB7,PB6,PB5,PB4,PB3,PB0,PA1,PA0} = w[7:0]
    movwf   Tmp
    andlw   0xfc
    movwf   PORTB
    btfsc   Tmp,2
      bsf   PORTB,0

    movf    Tmp,w
    andlw   0x03
    movwf   Param
    movf    PORTA,w
    andlw   0xfc
    iorwf   Param,w
    movwf   PORTA
#endif
    return

    ;
    ; Writes the character in W to LCD display
    ;
LcdPutChar:
    movwf   Tmp
    call    WriteData

	bsf	    LCD_RS	
	bsf	    LCD_E
    nop
	bcf	    LCD_E
                    ; Save data in Scroll Buffer

    movf   LcdY,w
    addlw	0-0	; Check for 0
	btfsc	STATUS,Z
	  goto	LcdPutCharFinish

	movf   LcdY,w
    addlw	256-1	; Check for 1
	btfsc	STATUS,Z
	  goto	LcdPutCharLine1

    movf   LcdY,w
    addlw	256-2	; Check for 2
	btfsc	STATUS,Z
	  goto	LcdPutCharLine2

    goto    LcdPutCharLine3


LcdPutCharLine1:
    movlw	ScrollBuffer1
    goto    LcdPutCharSave

LcdPutCharLine2:
    movlw	ScrollBuffer2
    goto    LcdPutCharSave

LcdPutCharLine3
    movlw   ScrollBuffer3
    
LcdPutCharSave:    
	movwf	FSR
    movf    LcdX,w
    addwf   FSR,f
    movf    Tmp,w
    movwf   INDF    ; Write data into buffer

LcdPutCharFinish:
    incf	LcdX,f
	movlw	40
	movwf	Amount
	call	Waitus
	return

    ;
    ; LcdWriteCommand: Writes the command in w to the LCD disply
    ;

LcdWriteCommand:
    movwf   Tmp
    call    WriteData

	bcf	    LCD_RS
	bsf	    LCD_E
	nop
	bcf	    LCD_E
	movlw	40
	movwf	Amount
	call	Waitus
	return

    ;
    ; LcdClearDisplay: Clears LCD display
    ;

LcdClearDisplay:
	movlw	0x01			; Clear display
    call    WriteData

    bcf	    LCD_RS
	bsf	    LCD_E
	nop
	bcf	    LCD_E
	clrf	LcdX
	clrf	LcdY
	movlw	2
	movwf	Amount
	call	Waitms
	return

    ;
    ; InitLcd:  Initializes LCD display
    ;

LcdInit:
	bcf	    LCD_RS			; Turn off stobes to LCD display
	bcf	    LCD_E

                        ; Clear scroll buffers
    clrf    Count
    movlw	20
	movwf	Loop1
LcdInitLoop:
    movlw   ScrollBuffer1
	movwf	FSR
    movf    Count,w
    addwf   FSR,f
    movlw   ' '         ; Replace with blank
    movwf   INDF

    movlw   ScrollBuffer2
	movwf	FSR
    movf    Count,w
    addwf   FSR,f
    movlw   ' '         ; Replace with blank
    movwf   INDF

    movlw   ScrollBuffer3
	movwf	FSR
    movf    Count,w
    addwf   FSR,f
    movlw   ' '         ; Replace with blank
    movwf   INDF

	incf	Count,f
	decfsz	Loop1,f
	    goto LcdInitLoop

	movlw	100
	movwf	Amount
	call	Waitms			; Wait for LCD to power up
	
	call	LcdClearDisplay

	movlw	0x38			; Set Function
	call	LcdWriteCommand	
	movlw	0x0c			; Turn on display (no cursor)
	call	LcdWriteCommand
	movlw	0x06			; Set Entry Mode
	call	LcdWriteCommand
	return

    ;
    ; LcdSetPos 
    ;

LcdSetPos:

	movlw	0x80	; Lcd Set Addr Command
	addwf	LcdX,w	; Add X offset
	btfsc	LcdY,0
	  addlw	0x40	; Odd line Y offset
	btfsc	LcdY,1
	  addlw	0x14	; Lines 2 and 3 offset

    movwf   Tmp
    call    WriteData

	bcf	    LCD_RS
	bsf	    LCD_E
	nop
	bcf	    LCD_E
	movlw	40
	movwf	Amount
	call	Waitus
	return

#ifdef FLASH_MEMORY_ACCESS
    ;
    ; LcdDisplayString(Param+1,Param+0)  {Param+1,param+0} form 16-bit address pointer
    ; The string must be located in flash memory code space
    ;
	
LcdDisplayString:
	movf	Param+1,w	; Fetch low address (assume bank 0)
	bsf	STATUS,RP1
	bcf	STATUS,RP0	; Bank2	
	movwf	EEADR^0x100	; Set low address
	bcf	STATUS,RP1	; Bank 0
	movf	Param+0,w
	bsf	STATUS,RP1	; Bank 2
	movwf	EEADRH^0x100	; Set high address
LcdDisplayStringLoop:
	bsf	STATUS,RP0	; Bank3
	bsf	EECON1^0x180,EEPGD	; Point to Program memory	
	bsf	EECON1^0x180,RD	; Start read operation
	nop			; two required NOPs
	nop
	bcf	STATUS,RP0	; Bank2
	movf	EEDATA^0x100,w	; Fetch Low Byte
	bcf	STATUS,RP1	; Bank0
	addlw	0		; Check for end of string
	btfsc	STATUS,Z
	  return		; End of string			
	addlw	256-'\n'	; Check for \n
	btfsc	STATUS,Z
	  goto	LcdDisplayStringNewLine
	addlw	'\n'		; Restore check value
	call	LcdPutChar
LcdDisplayStringAdvance:
	bsf	STATUS,RP1	; Bank 2
	incf	EEADR^0x100,f	; Advance read pointer
	btfsc	STATUS,Z	
	  incf	EEADRH^0x100,f	; Advance high order address if overflow
	goto	LcdDisplayStringLoop
LcdDisplayStringNewLine:
	clrf	LcdX
	incf	LcdY,f
	call	LcdSetPos	; Goto (LcdX,LcdY)
	goto	LcdDisplayStringAdvance

#endif

    ;
    ;  Main Program
    ;

Main:
	bcf		STATUS,RP0
	bcf		STATUS,RP1

	call 	InitWaitTimer



	bcf		STATUS,RP1
	bsf		STATUS,RP0		; Select Bank 1

#ifdef __16F873

	movlw	0x2f			; Port A[3:0],A[5] are input for A/D				
	movwf	TRISA^0x80

	clrf	TRISB^0x80      ; PORTB is Output
	movlw	0x10			; Output PORTC[7:5],PORTC[3:0], Input PORTC[4]
	movwf	TRISC^0x80          	          	

	movlw	0x00			; (left justified data) 8 or 5 A/D channels
	movwf	ADCON1^0x80
	bcf	    STATUS,RP0      ; Go back to Bank 0
	movlw	0x81			; FOSC/32, channel=0, ADON=1
	movwf	ADCON0
#else

	bcf		STATUS,RP0		; Select Bank 0
	
   	movlw	0x07
	movwf	CMCON			; Turn off 16F82x comparators to save power

	bsf		STATUS,RP0		; Select Bank 1

    movlw	0x20			; Port A[4] is input, Port A[3:0] are output
    movwf   TRISA^0x80      ; PORTA is Output
    clrf	TRISB^0x80      ; PORTB is Output

#endif

	bsf	    STATUS,RP0          ; Go to Bank 1
	movlw  	PRESCALE_VALUE		; Set Timer 0 prescale value 
	movwf	OPTION_REG^0x080
	
	bcf		STATUS,RP0            	; Go back to Bank 0

	call	LcdInit
	call	LcdClearDisplay
	call	InitRS232
								; Initialize varibles
	clrf	LcdX
	clrf	LcdY
    clrf    LastRS232Byte
    clrf    Flags

    movlw   STATE_NORMAL
    movwf   State

    movlw  	(1<<GIE) | (1<<PEIE)
	movwf  	INTCON		; Enable Interrupts	

TheLoop:
    movf    State,w
	addlw	STATE_NORMAL	; Check
	btfsc	STATUS,Z
	  goto	NormalState
	addlw	STATE_NORMAL		; Restore check value

	addlw	256-STATE_WAIT_X	; Check
	btfsc	STATUS,Z
	  goto	WaitXState
	addlw	STATE_WAIT_X		; Restore check value

	addlw	256-STATE_WAIT_Y	; Check
	btfsc	STATUS,Z
	  goto	WaitYState
	addlw	STATE_WAIT_Y		; Restore check value

	addlw	256-STATE_WAIT_COMMAND	; Check
	btfsc	STATUS,Z
	  goto	EscCommand
	addlw	STATE_WAIT_COMMAND		; Restore check value
    
    goto    TheLoop

WaitXState:
    call	GetRS232Byte
    movwf   LcdX
    movlw   STATE_WAIT_Y
    movwf   State
    goto    TheLoop

WaitYState:
    call	GetRS232Byte
    movwf   LcdY
    movlw   STATE_NORMAL
    movwf   State
    call    LcdSetPos	; Goto (LcdX,LcdY)
    goto    TheLoop

        ;
        ; Process Esc command
        ;

EscCommand:
    movlw   STATE_NORMAL
    movwf   State
    call	GetRS232Byte

	addlw	ESC_DISABLE_CURSOR	; Check
	btfsc	STATUS,Z
	  goto	DisableCursor
	addlw	ESC_DISABLE_CURSOR		; Restore check value

	addlw	256-ESC_ENABLE_UNDER_CURSOR	; Check
	btfsc	STATUS,Z
	  goto	EnableUnderCursor
	addlw	ESC_ENABLE_UNDER_CURSOR		; Restore check value

	addlw	256-ESC_ENABLE_BLOCK_CURSOR	; Check
	btfsc	STATUS,Z
	  goto	EnableBlockCursor
	addlw	ESC_ENABLE_BLOCK_CURSOR		; Restore check value

	addlw	256-ESC_SCROLL_LEFT	; Check
	btfsc	STATUS,Z
	  goto	ScrollLeft
	addlw	ESC_SCROLL_LEFT		; Restore check value

	addlw	256-ESC_SCROLL_RIGHT	; Check
	btfsc	STATUS,Z
	  goto	ScrollRight
	addlw	ESC_SCROLL_RIGHT		; Restore check value

	addlw	256-ESC_ENABLE_DISPLAY	; Check
	btfsc	STATUS,Z
	  goto	EnableDisplay
	addlw	ESC_ENABLE_DISPLAY		; Restore check value

	addlw	256-ESC_DISABLE_DISPLAY	; Check
	btfsc	STATUS,Z
	  goto	DisableDisplay
	addlw	ESC_DISABLE_DISPLAY		; Restore check value

	addlw	256-ESC_RAW_COMMAND	; Check
	btfsc	STATUS,Z
	  goto	RawCommand
	addlw	ESC_RAW_COMMAND		; Restore check value

	addlw	256-ESC_DISABLE_VERT_SCROLL	; Check
	btfsc	STATUS,Z
	  goto	DisableVertScroll
	addlw	ESC_DISABLE_VERT_SCROLL		; Restore check value

	addlw	256-ESC_ENABLE_VERT_SCROLL	; Check
	btfsc	STATUS,Z
	  goto	EnableVertScroll
	addlw	ESC_ENABLE_VERT_SCROLL		; Restore check value


    movwf   LastRS232Byte
    andlw   DISPLAY_CUSTOM_MASK   
	addlw	256-ESC_WRITE_CUSTOM	; Check
	btfsc	STATUS,Z
	  goto	WriteCustomChar
	movf    LastRS232Byte,w
    
    goto    TheLoop

DisableCursor:
    movlw   0x0c
    call    LcdWriteCommand
    goto    TheLoop

EnableUnderCursor:
    movlw   0x0e
    call    LcdWriteCommand
    goto    TheLoop

EnableBlockCursor:
    movlw   0x0f
    call    LcdWriteCommand
    goto    TheLoop

ScrollLeft:
    movlw   0x18
    call    LcdWriteCommand
    goto    TheLoop

ScrollRight:
    movlw   0x1c
    call    LcdWriteCommand
    goto    TheLoop

EnableDisplay:
    movlw   0x0c
    call    LcdWriteCommand
    goto    TheLoop

DisableDisplay:
    movlw   0x08
    call    LcdWriteCommand
    goto    TheLoop

RawCommand:
    movf    LastRS232Byte,w
    call    LcdWriteCommand
    goto    TheLoop

DisableVertScroll:
    bsf     Flags,FLAGS_DISABLE_VERT_SCROLL
    goto    TheLoop

EnableVertScroll:
    bcf     Flags,FLAGS_DISABLE_VERT_SCROLL
    goto    TheLoop

WriteCustomChar:
    movf    LastRS232Byte,w
    andlw   0x7             ; Just get character ID
    movwf   CgRamAddr
    bcf     STATUS,C
    rlf     CgRamAddr,f
    rlf     CgRamAddr,f
    rlf     CgRamAddr,f       ; Set character Ram address
    movlw   8
    movwf   Count
WriteCustomCharLoop:
    movf    CgRamAddr,w
    iorlw   0x40
    call    LcdWriteCommand
    call	GetRS232Byte
    call    LcdPutChar      ; Write the data
    decf    LcdX,f          ; undo inc of LcdX
    incf    CgRamAddr,f
	decfsz	Count,f
      goto  WriteCustomCharLoop
                        ; Go back to normal character mode
    call	LcdSetPos	; Goto (LcdX,LcdY)
    goto    TheLoop
    
    ;
    ; Normal single character
    ;

NormalState:
	call	GetRS232Byte

      ; Lame case statement 
	addlw	256-TERM_LF	; Check for \n
	btfsc	STATUS,Z
	  goto	PreTerminalNewLine1
	addlw	TERM_LF		; Restore check value

	addlw	256-TERM_CR	; Check for \r
	btfsc	STATUS,Z
	  goto	PreTerminalNewLine2
	addlw	TERM_CR		; Restore check value

    movwf   LastRS232Byte

    addlw	256-TERM_BS	; Check for BS
	btfsc	STATUS,Z
	  goto	TerminalBackSpace
	addlw	TERM_BS		; Restore check value

    addlw	256-TERM_HOME ; Check
	btfsc	STATUS,Z
	  goto	TerminalHome
	addlw	TERM_HOME		; Restore check value

    addlw	256-TERM_CLEAR ; Check
	btfsc	STATUS,Z
	  goto	TerminalClear
	addlw	TERM_CLEAR	; Restore check value

    addlw	256-TERM_TAB ; Check
	btfsc	STATUS,Z
	  goto	TerminalTab
	addlw	TERM_TAB	; Restore check value

    addlw	256-TERM_POS ; Check
	btfsc	STATUS,Z
	  goto	TerminalPos
	addlw	TERM_POS	; Restore check value

    addlw	256-TERM_ESC ; Check
	btfsc	STATUS,Z
	  goto	TerminalEscape
	addlw	TERM_ESC	; Restore check value
    
    movf    LcdX,w
    addlw   256-20
    btfsc   STATUS,Z
      call  TerminalNewLine

    movf    LastRS232Byte,w
    andlw   DISPLAY_CUSTOM_MASK
    addlw	256-DISPLAY_CUSTOM_VALUE ; Check
	btfsc	STATUS,Z
	  goto  DisplayCustomChar

    movf    LastRS232Byte,w
	call	LcdPutChar
      
	goto	TheLoop

PreTerminalNewLine1:    ; \n received
    movf    LastRS232Byte,w
	addlw	256-TERM_CR	; Check for previous \r
	btfsc	STATUS,Z
	  goto	TheLoop
    movlw   TERM_LF
    movwf   LastRS232Byte
PreTerminalNewLine:  
    call    TerminalNewLine
    goto    TheLoop

PreTerminalNewLine2:    ; \r received
    movf    LastRS232Byte,w
	addlw	256-TERM_LF	; Check for previous \n
	btfsc	STATUS,Z
	  goto	TheLoop
    movlw   TERM_CR
    movwf   LastRS232Byte    
    call    TerminalNewLine
    goto    TheLoop

TerminalNewLine:
    clrf	LcdX
	incf	LcdY,f
	movf	LcdY,w
    addlw	256-4	; Check for need to scroll
	btfsc	STATUS,Z
	  call	ScrollDisplay
    call	LcdSetPos	; Goto (LcdX,LcdY)
    return

TerminalBackSpace:
    movf    LcdX,w
    addlw   0           ;Check for zero
    btfsc STATUS,Z
      goto  TheLoop
	decf	LcdX,f
	call	LcdSetPos	; Goto (LcdX,LcdY)
    movlw   ' '
    call    LcdPutChar  ; Remove character
    decf    LcdX,f
    call	LcdSetPos	; Goto (LcdX,LcdY)
	goto	TheLoop

TerminalHome:
    clrf	LcdX
	clrf	LcdY
    call	LcdSetPos	; Goto (LcdX,LcdY)
    goto	TheLoop

TerminalClear:
    call    LcdClearDisplay
    goto	TheLoop

TerminalTab:
    movf    LcdX,w
    addlw   4
    andlw   0xfc    ; Snap to tab stop
    movwf   LcdX    ; Save new value
    addlw   256-20
    btfsc   STATUS,Z
      goto  PreTerminalNewLine
    call    LcdSetPos
    goto    TheLoop

TerminalPos:
    movlw   STATE_WAIT_X
    movwf   State
    goto    TheLoop

TerminalEscape:
    movlw   STATE_WAIT_COMMAND
    movwf   State
    goto    TheLoop

DisplayCustomChar:    
    movlw   DISPLAY_CUSTOM_VALUE
    subwf   LastRS232Byte,w     ; w = LastRS232Byte - DISPLAY_CUSTOM_MASK
    call	LcdPutChar
    goto    TheLoop

    ;*************************************************
    ;**                                             **
    ;**  ScrollDisplay:                             **
    ;**                                             **
    ;*************************************************

ScrollDisplay:
    btfsc   Flags,FLAGS_DISABLE_VERT_SCROLL
      goto  DoNotScrollDisplay    
    call	LcdClearDisplay

    clrf    Count
	movlw	20
	movwf	Loop1
ScrollDisplayLoop1:
    movlw    ScrollBuffer1  
	movwf	FSR
    movf    Count,w
    addwf   FSR,f
    movf    INDF,w 
    call    LcdPutChar

	incf	Count,f
	decfsz	Loop1,f
	    goto ScrollDisplayLoop1

    clrf    LcdX
    incf    LcdY,f
	call	LcdSetPos	; Goto (LcdX,LcdY)
    clrf    Count
	movlw	20
	movwf	Loop1
ScrollDisplayLoop2:
    movlw    ScrollBuffer2  
	movwf	FSR
    movf    Count,w
    addwf   FSR,f
    movf    INDF,w 
    call    LcdPutChar

	incf	Count,f
	decfsz	Loop1,f
	    goto ScrollDisplayLoop2

        ; Copy line 3 to line 2 and clear line 3 buffer

    clrf    LcdX
    incf    LcdY,f
	call	LcdSetPos	; Goto (LcdX,LcdY)
    clrf    Count
	movlw	20
	movwf	Loop1
ScrollDisplayLoop3:
    movlw    ScrollBuffer3
	movwf	FSR
    movf    Count,w
    addwf   FSR,f
    movf    INDF,w
    movwf   Tmp
    movlw   ' '         ; Replace with blank
    movwf    INDF
    movf    Tmp,w
    call    LcdPutChar

	incf	Count,f
	decfsz	Loop1,f
	    goto ScrollDisplayLoop3

DoNotScrollDisplay:
    clrf	LcdX
    movlw   3
    movwf   LcdY
    return;   


	end


file: /Techref/microchip/io/dev/lcd/LcdTerminal.asm, 24KB, , updated: 2003/9/10 12:39, local time: 2024/3/28 07:42,
TOP NEW HELP FIND: 
18.209.209.246:LOG IN

 ©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE!

<A HREF="http://massmind.org/Techref/microchip/io/dev/lcd/LcdTerminal.asm"> microchip io dev lcd LcdTerminal</A>

Did you find what you needed?

 

Welcome to massmind.org!

 

Welcome to massmind.org!

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  .