LABEL + Modifying Volume LabelsAllows you to modify, add, or delete a volume label.
VERSION
PC-DOS 3.0+
MS-DOS equivalent: LABEL (3.0+)
TYPE
External
SYNTAX
[d:][path] LABEL [ld:][volumelabel]
OPTIONS
[d:][path] Specifies the drive letter and path that
contain the LABEL command file.
[ld:] Specifies the drive letter of the disk
you wish to label.
[volumelabel] Specifies the label to be used to
identify the disk. The volume label can
contain up to 11 characters.
EXAMPLE
LABEL B:OCTSTMTS
labels the disk in drive B as OCTSTMTS.
MESSAGE
Cannot LABEL a Network drive
You cannot change an existing volume label or create a new one
for a network drive.
NOTE
If you do not specify a label with the command, you will be
prompted for the label or for whether you want the existing label
to be deleted:
Volume in drive x is xxxxxxxxxxx
Volume label (11 characters, ENTER for none)?
------------------------------------------------------------------
[For related topics, press R]
SEE ALSO
ASSIGN Command
CHKDSK Command
FORMAT Command
SELECT Command
SYS Command
VER Command
VOL Command
file: /Techref/DOS/command/label.htm, 1KB, , updated: 1999/2/20 11:24, local time: 2024/8/31 19:23,
18.117.192.53:LOG IN
|
©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions? <A HREF="http://massmind.org/techref/DOS/command/label.htm"> DOS command label</A> |
Did you find what you needed? |
Welcome to massmind.org! |
Ashley Roll has put together a really nice little unit here. Leave off the MAX232 and keep these handy for the few times you need true RS232! |
.