Interrupt 01h Single step(0:0004h) Taken after every instruction when CPU Trap Flag indicates
single-step mode (bit 8 of FLAGS is 1). This is what makes the T
command of DEBUG work for single stepping. Is not generated after MOV
to segment register or POP of segment register. (unless you have a
very early INTEL\8088 with the microcode bug).
file: /Techref/int/01.htm, 0KB, , updated: 1999/4/22 07:48, local time: 2024/11/8 15:59,
18.118.137.178:LOG IN ©2024 PLEASE DON'T RIP! THIS SITE CLOSES OCT 28, 2024 SO LONG AND THANKS FOR ALL THE FISH!
|
©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions? <A HREF="http://massmind.org/techref/int/01.htm"> int 01</A> |
Did you find what you needed? |
Welcome to massmind.org! |
Welcome to massmind.org! |
.