The TI754410 Can be configured as either four half bridges or two full h-bridges + See also:
Need to be careful with this circuit, not to (accidentally) drive the control lines around 1Vdc... it can blow up the power transistors. For almost the same cost, you can go to the Alegro microchips as the UDN2998W, it is a *dual full bridge* internal protection for current and thermal, and much more, 50V @ 2A. Take a look at:
Archive:
Comments:
See also:
Questions:
file: /Techref/io/hbridge.htm, 3KB, , updated: 2016/8/15 13:26, local time: 2024/8/14 13:02,
owner: JMN-EFP-786,
3.143.1.204:LOG IN
|
©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions? <A HREF="http://massmind.org/techref/io/hbridge.htm"> H-Bridges</A> |
Did you find what you needed? |
Welcome to massmind.org! |
Ashley Roll has put together a really nice little unit here. Leave off the MAX232 and keep these handy for the few times you need true RS232! |
.