please dont rip this site

Language Pcl LJ1880.ASC


     The chord angle refers to the angle used to draw an arc
     in a curve. The smaller the chord angle the smoother
     the curve. The default is a chord angle of 5 degrees.
     For more information see the PCL 5 Printer Language
     Technical Reference Manual.
     LEGEND: Ec = [Ctrl] [P] [Esc] in DOS EDIT
     EcE                           Resets the printer.
     Ec%0B                         Enters HP-GL/2 mode.
     IN;                           Initializes HP-GL/2 mode.
     SP1;                          Selects pen number one
                                   (black). Even though
                                   there is no physical pen,
                                   the SP command must be
                                   used to enable printing.
     PA2000,0;                     Specifies (2000,0) as the
                                   starting point, to plot
     PD;AA0,0,45,25;               With the pen down, draws
                                   a 45 degree arc (positive
                                   angle) with center
                                   coordinates of (0,0) and
                                   a chord angle of 25
     PU1050,1060;                  Lifts the pen and moves
                                   to coordinates
                                   (1050,1060) Plotter Units
     PD;AA0,0,-45,10;              With the pen down, draws
                                   a 45 degree arc (negative
                                   angle) using the same
                                   center point as the first
                                   arc, but with a 10 degree
                                   chord angle.
     PU;1000,0;                    Lifts the pen and moves
                                   to coordinates (1000,0),
     PD;AA0,0,45;                  With the pen down, draws
                                   another 45 degree arc
                                   (positive angle) with the
                                   same center point, but
                                   with the default chord
                                   angle of 5 degrees.
     Ec%0A                         Enters PCL mode.
     EcE                           Sends a reset to end the
                                   job and eject the page.
            Copyright  Hewlett-Packard Co. 1993
   The information contained herein is subject to change
                      without notice.
   Hewlett-Packard shall not be liable for incidental or
  consequential damages in connection with the use of this

file: /Techref/language/pcl/lj1880.asc, 2KB, , updated: 1993/11/15 17:12, local time: 2024/6/21 22:56,

 ©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE!

<A HREF=""> language pcl lj1880</A>

Did you find what you needed?


Welcome to!


Welcome to!