please dont rip this site

Language Pcl LJ1882.ASC

USING  THE AT COMMAND

     
     The AT command is Absolute Arc Three Point, and draws
     an arc segment, using absolute coordinates, from a
     starting point, through an intermediate point, to an
     end point.  For more information see the PCL 5 Printer
     Language Technical Reference Manual.
     
     LEGEND: Ec = [Ctrl] [P] [Esc] in DOS EDIT
     
     EcE                           Resets the printer.
     
     Ec%0B                         Enters HP-GL/2 mode.
     
     IN;                           Initializes HP-GL/2 mode.
     
     SP1;                          Selects pen number 1
                                   (black). Even though
                                   there is no physical pen,
                                   the SP command must be
                                   used to enable printing.
     
     PA1000,100;PD2500,100;        Specifies (1000,100) as
                                   the starting location,
                                   places the pen down, and
                                   draws a line to
                                   (2500,100).
     
     PU650,1150;PD1000,1150;       Lifts the pen up and
                                   moves to (650,1150), then
                                   places the pen down and
                                   draws a line to
                                   (1000,1150).
     
     PU650,450;PD1000,450;         Lifts the pen up and
                                   moves to (650,450) then
                                   places the pen down, and
                                   draws a line to
                                   (1000,450).
     
     PU1000,100;PD1000,1500,2500,1500;  Lifts the pen up and
                                   moves to (1000,100), then
                                   places the pen down and
                                   draws a line to
                                   (1000,1500), then draws a
                                   line to (2500,1500).
     
     AT3200,800,2500,100;          Prints an arc, starting
                                   at the current pen
                                   position (25,1500),
                                   passing through
                                   (3200,800) and ending at
                                   (2500,100).
     PU3200,900;PD;                Lifts the pen and moves
                                   it to (3200,900), and
                                   sets the pen down.
     
     AT3300,800,3200,700;          Prints an arc, starting
                                   at the current pen
                                   position, passing through
                                   (3300,800) and ending at
                                   (3200,700).
     
     PU3300,800;PD3500,800;        Lifts the pen to
                                   (3300,800) and then puts
                                   the pen down and draws a
                                   line to (3500,800).
     
     Ec%0A;                        Enters PCL mode.
     
     EcE                           Sends a reset to end the
                                   job and eject the page.
     
     
     
     
            Copyright  Hewlett-Packard Co. 1993
   The information contained herein is subject to change
                      without notice.
   Hewlett-Packard shall not be liable for incidental or
  consequential damages in connection with the use of this
                         material.
     


file: /Techref/language/pcl/lj1882.asc, 3KB, , updated: 1993/11/15 16:13, local time: 2024/12/2 02:23,
TOP NEW HELP FIND: 
18.97.9.170:LOG IN

 ©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE!

<A HREF="http://massmind.org/techref/language/pcl/lj1882.asc"> language pcl lj1882</A>

Did you find what you needed?

 

Welcome to massmind.org!

 

Welcome to massmind.org!

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  .