please dont rip this site

Language Pcl LJ2011.ASC


     The User-Defined Line Type ( UL ) command allows you to
     define and store your own line types. The command does
     not itself select a line type, it only defines it. To
     select a line type use the Line Type ( LT ) command.
     For more information see the PCL 5 Printer Language
     Technical Reference Manual. The syntax for the UL
     command is as follows:
     UL index,[gap1,...gap20];

     Index                         Identifies the number of
                                   the line type to be
     Gaps                          Specifies alternate pen
                                   down and pen up stretches
                                   in the line type pattern;
                                   if gaps are numbered
                                   starting with1, odd
                                   numbered gaps are pen up
                                   moves. The first gap is a
                                   pen down move.  A maximum
                                   of 20 gaps are allowed
                                   for each user-defined
                                   line type.

     LEGEND: Ec = [Ctrl] [P] [Esc] in DOS EDIT.
     EcE                           Resets the printer.
     Ec%0B                         Enters HP-GL/2 mode.
     IN;                           Initializes HP-GL/2 mode.
     SP1;                          Selects pen number 1,
                                   (black). Even though
                                   there is no physical pen,
                                   the SP command must be
                                   used to enable printing.
     PA4000,3000;                  Specifies absolute
                                   plotting and moves to
     UL8,0,15,0,15,0,15,40,15;     Redefines the user-
                                   defined line type with an
                                   index number of 8;
                                   specifies the lines and
                                   spaces as follows, in
                                   percentages of the line
                                   distance: gap1 as a dot
                                   (0%), gap2 as a space
                                   (15%), gap3 as a dot
                                   (0%), gap4 as a space
                                   (15%), gap5 as a dot
                                   (0%), gap6 as a space
                                   (15%), gap7 as a line
                                   (40%), and gap8 as a
                                   space (15%).
     LT8,10;PU2000,2500;PD5000,2500;    Specifies line type
                                   number8 (just defined),
                                   with a pattern length of
                                   10% of the distance
                                   between P1 and P2, (in
                                   this case, the lower-left
                                   and upper-right corners
                                   of the PCL picture
                                   frame); lifts the pen and
                                   moves to (2000,2500);
                                   sets the pen down to draw
                                   a line to (5000,2500).
     Ec%0A                         Enters the PCL mode.
     EcE                           Sends a reset to end the
                                   job and eject the page.

            Copyright  Hewlett-Packard Co. 1993
   The information contained herein is subject to change
                      without notice.
   Hewlett-Packard shall not be liable for incidental or
  consequential damages in connection with the use of this

file: /Techref/language/pcl/lj2011.asc, 4KB, , updated: 1993/11/15 17:21, local time: 2024/6/17 20:12,

 ©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE!

<A HREF=""> language pcl lj2011</A>

Did you find what you needed?


Welcome to!


Welcome to!