please dont rip this site

Language Pcl LJ2012.ASC


     When printing labels in HP-GL/2,  use the Label ( LB )
     command.  For more information see the PCL 5 Printer
     Language Technical Reference Manual.
     LEGEND: Ec = [Ctrl] [P] [Esc] in DOS EDIT.
     EcE                           Resets the printer.
     Ec%0B                         Enters HP-GL/2 mode.
     IN;                           Initializes HP-GL/2 mode.
     SP1;                          Selects pen number 1,
                                   (black). Even though
                                   there is no physical pen,
                                   the SP command must be
                                   used to enable printing.
     PA1500,2500;                  Specifies absolute
                                   plotting and moves to
     SD1,21,2,1,4,25,5,1,6,0,7,52; Designates the 25 point
                                   Universe Italic font as
                                   the standard font.
     DT*,1;                        Defines the asterisk (*),
                                   as the label terminator
                                   (the 1 indicates the
                                   terminator should not be
     SA;                           Selects the alternate
                                   font for printing; since
                                   an alternate font hasn't
                                   been designated, the
                                   default 11.5 point stick
                                   font is selected.
     LBThis is the Stick Font
     (Default)CR-LF CR-LF*;        Prints the first line of
                                   text, followed by two
                                   Carriage Return (CR) and
                                   two Line Feed (LF)
                                   control codes. Notice how
                                   the asterisk terminates
                                   the label.
     SS;                           Selects the standard
                                   font, defined with the SD
                                   command above, as a 25
                                   point Universe Italic
     LBThis is Universe Italic*;   Prints the next line of
                                   text in the newly
                                   specified font.
     Ec%0A                         Enters PCL mode.
     EcE                           Sends a reset to end the
                                   job and eject the page.

            Copyright  Hewlett-Packard Co. 1993
   The information contained herein is subject to change
                      without notice.
   Hewlett-Packard shall not be liable for incidental or
  consequential damages in connection with the use of this

file: /Techref/language/pcl/lj2012.asc, 3KB, , updated: 1993/11/15 17:22, local time: 2024/6/21 06:13,

 ©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE!

<A HREF=""> language pcl lj2012</A>

Did you find what you needed?


Welcome to!


Welcome to!