please dont rip this site

Language Pcl LJ2015.ASC

USING  THE ABSOLUTE DIRECTION ( DI ) COMMAND

     
     The Absolute Direction ( DI ) command specifies the
     slope or direction at which characters are drawn,
     independent of P1 and P2 settings. For more information
     see the PCL 5 Printer Language Technical Reference
     Manual.  The syntax for this command is as follows:
     
     DI run,rise; or DI;

PARAMETERS:
     
     Run                           Specifies the X-component
                                   of the label direction.
     
     Rise                          Specifies the Y-component
                                   of the label direction.
     

PROGRAM:
     
     LEGEND: Ec = [Ctrl] [P] [Esc] in DOS EDIT.
     
     
     EcE                           Resets the printer.
     
     Ec%0B                         Enters HP-GL/2 mode.
     
     IN;                           Initializes HP-GL/2 mode.
     
     SP1;                          Selects pen number 1,
                                   (black). Even though
                                   there is no physical pen,
                                   the SP command must be
                                   used to enable printing.
     
     PA3500,2500;                  Specifies absolute
                                   plotting and moves to
                                   (3500,2500).
     
     DT*;                          Defines the asterisk (*)
                                   as the label terminator.
     
     DI1,1;LBDIRECTION CR*;        Prints the word
                                   "DIRECTION" at a 45
                                   degree angle up to the
                                   right; Carriage Return
                                   "CR" returns the pen to
                                   the Origin (3500,2500).
     
     DI1,-1;LBDIRECTION CR*;       Prints the same word, at
                                   a 45 degree angle up and
                                   to the left, followed by
                                   a "CR" to return the pen
                                   to the origin.
     
     DI-1,-1;LBDIRECTION CR*;      Prints the same word, at
                                   a 45 degree angle down
                                   and to the left, followed
                                   by a "CR" to return the
                                   pen to the origin.
     
     DI-1,1;LBDIRECTION CR*;       Prints the same word, at
                                   a 45 degree angle down
                                   and to the right,
                                   followed by a "CR" to
                                   return the pen to the
                                   origin.
     
     Ec%0A                         Enters the PCL mode.
     
     EcE                           Sends a reset to end the
                                   job and eject the page.


            Copyright  Hewlett-Packard Co. 1993
   The information contained herein is subject to change
                      without notice.
   Hewlett-Packard shall not be liable for incidental or
  consequential damages in connection with the use of this
                         material.




file: /Techref/language/pcl/lj2015.asc, 3KB, , updated: 1993/11/15 16:23, local time: 2024/12/2 02:56,
TOP NEW HELP FIND: 
18.97.9.170:LOG IN

 ©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE!

<A HREF="http://massmind.org/techref/language/pcl/lj2015.asc"> language pcl lj2015</A>

Did you find what you needed?

 

Welcome to massmind.org!

 

Welcome to massmind.org!

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  .