This is file "port.c.diff". It contains the differences between the file "FreeRTOS\Source\portable\MPLAB\PIC18F\port.c" (versions 5.2.0 and v5.3.0) and my modifications that solve the problem with saving/restoring the sections "MATH_DATA" and ".tmpdata".
This patch file may be applied using TortoiseMerge, which comes with TortoiseSVN.
--- port.c sex mai 29 15:28:15 2009 +++ port.c sex mai 29 15:27:57 2009 @@ -142,6 +142,13 @@ */ static void prvLowInterrupt( void ); +extern unsigned char ram * GetMATHDATAStrt ( void ); +extern unsigned char GetMATHDATALen ( void ); +extern unsigned char ram * GetTMPDATAStrt ( void ); +extern unsigned char GetTMPDATALen ( void ); +extern void SaveTMP_MATH ( void ); +extern void RestoreTMP_MATH ( void ); + /* * Macro that pushes all the registers that make up the context of a task onto * the stack, then saves the new top of stack into the TCB. @@ -198,31 +205,7 @@ MOVFF PRODL, PREINC1 \ MOVFF PCLATU, PREINC1 \ MOVFF PCLATH, PREINC1 \ - /* Store the .tempdata and MATH_DATA areas as described above. */ \ - CLRF FSR0L, 0 \ - CLRF FSR0H, 0 \ - MOVFF POSTINC0, PREINC1 \ - MOVFF POSTINC0, PREINC1 \ - MOVFF POSTINC0, PREINC1 \ - MOVFF POSTINC0, PREINC1 \ - MOVFF POSTINC0, PREINC1 \ - MOVFF POSTINC0, PREINC1 \ - MOVFF POSTINC0, PREINC1 \ - MOVFF POSTINC0, PREINC1 \ - MOVFF POSTINC0, PREINC1 \ - MOVFF POSTINC0, PREINC1 \ - MOVFF POSTINC0, PREINC1 \ - MOVFF POSTINC0, PREINC1 \ - MOVFF POSTINC0, PREINC1 \ - MOVFF POSTINC0, PREINC1 \ - MOVFF POSTINC0, PREINC1 \ - MOVFF POSTINC0, PREINC1 \ - MOVFF POSTINC0, PREINC1 \ - MOVFF POSTINC0, PREINC1 \ - MOVFF POSTINC0, PREINC1 \ - MOVFF INDF0, PREINC1 \ - MOVFF FSR0L, PREINC1 \ - MOVFF FSR0H, PREINC1 \ + \ /* Store the hardware stack pointer in a temp register before we \ modify it. */ \ MOVFF STKPTR, FSR0L \ @@ -243,6 +226,9 @@ /* Store the number of addresses on the hardware stack (from the \ temporary register). */ \ MOVFF FSR0L, PREINC1 \ + \ + call SaveTMP_MATH,0 \ + \ MOVF PREINC1, 1, 0 \ _endasm \ \ @@ -275,6 +261,9 @@ /* How many return addresses are there on the hardware stack? Discard \ the first byte as we are pointing to the next free space. */ \ MOVFF POSTDEC1, FSR0L \ + \ + call RestoreTMP_MATH,0 \ + \ MOVFF POSTDEC1, FSR0L \ _endasm \ \ @@ -295,29 +284,6 @@ } \ \ _asm \ - /* Restore the .tmpdata and MATH_DATA memory. */ \ - MOVFF POSTDEC1, FSR0H \ - MOVFF POSTDEC1, FSR0L \ - MOVFF POSTDEC1, POSTDEC0 \ - MOVFF POSTDEC1, POSTDEC0 \ - MOVFF POSTDEC1, POSTDEC0 \ - MOVFF POSTDEC1, POSTDEC0 \ - MOVFF POSTDEC1, POSTDEC0 \ - MOVFF POSTDEC1, POSTDEC0 \ - MOVFF POSTDEC1, POSTDEC0 \ - MOVFF POSTDEC1, POSTDEC0 \ - MOVFF POSTDEC1, POSTDEC0 \ - MOVFF POSTDEC1, POSTDEC0 \ - MOVFF POSTDEC1, POSTDEC0 \ - MOVFF POSTDEC1, POSTDEC0 \ - MOVFF POSTDEC1, POSTDEC0 \ - MOVFF POSTDEC1, POSTDEC0 \ - MOVFF POSTDEC1, POSTDEC0 \ - MOVFF POSTDEC1, POSTDEC0 \ - MOVFF POSTDEC1, POSTDEC0 \ - MOVFF POSTDEC1, POSTDEC0 \ - MOVFF POSTDEC1, POSTDEC0 \ - MOVFF POSTDEC1, INDF0 \ /* Restore the other registers forming the tasks context. */ \ MOVFF POSTDEC1, PCLATH \ MOVFF POSTDEC1, PCLATU \ @@ -363,6 +329,11 @@ } /*-----------------------------------------------------------*/ +void FinishTask( void ) + { + vTaskDelete( NULL ); + } + /* * See header file for description. */ @@ -370,18 +341,8 @@ { unsigned portLONG ulAddress; unsigned portCHAR ucBlock; +portSTACK_TYPE ram *p; - /* Place a few bytes of known values on the bottom of the stack. - This is just useful for debugging. */ - - *pxTopOfStack = 0x11; - pxTopOfStack++; - *pxTopOfStack = 0x22; - pxTopOfStack++; - *pxTopOfStack = 0x33; - pxTopOfStack++; - - /* Simulate how the stack would look after a call to vPortYield() generated by the compiler. @@ -453,24 +414,29 @@ *pxTopOfStack = ( portSTACK_TYPE ) 0x00; /* PCLATH. */ pxTopOfStack++; - /* Next the .tmpdata and MATH_DATA sections. */ - for( ucBlock = 0; ucBlock <= portCOMPILER_MANAGED_MEMORY_SIZE; ucBlock++ ) - { - *pxTopOfStack = ( portSTACK_TYPE ) ucBlock; - *pxTopOfStack++; - } + /* The only function return address so far is the address of the + task. */ + ulAddress = ( unsigned portLONG ) pxCode; - /* Store the top of the global data section. */ - *pxTopOfStack = ( portSTACK_TYPE ) portCOMPILER_MANAGED_MEMORY_SIZE; /* Low. */ + /* TOS low. */ + *pxTopOfStack = ( portSTACK_TYPE ) ( ulAddress & ( unsigned portLONG ) 0x00ff ); pxTopOfStack++; + ulAddress >>= 8; - *pxTopOfStack = ( portSTACK_TYPE ) 0x00; /* High. */ + /* TOS high. */ + *pxTopOfStack = ( portSTACK_TYPE ) ( ulAddress & ( unsigned portLONG ) 0x00ff ); pxTopOfStack++; + ulAddress >>= 8; - /* The only function return address so far is the address of the - task. */ - ulAddress = ( unsigned portLONG ) pxCode; + /* TOS even higher. */ + *pxTopOfStack = ( portSTACK_TYPE ) ( ulAddress & ( unsigned portLONG ) 0x00ff ); + pxTopOfStack++; +#if 0 + //-------------------------------------------------------------------------- + /* . */ + ulAddress = ( unsigned portLONG ) FinishTask; + /* TOS low. */ *pxTopOfStack = ( portSTACK_TYPE ) ( ulAddress & ( unsigned portLONG ) 0x00ff ); pxTopOfStack++; @@ -484,12 +450,24 @@ /* TOS even higher. */ *pxTopOfStack = ( portSTACK_TYPE ) ( ulAddress & ( unsigned portLONG ) 0x00ff ); pxTopOfStack++; + //-------------------------------------------------------------------------- /* Store the number of return addresses on the hardware stack - so far only the address of the task entry point. */ + *pxTopOfStack = ( portSTACK_TYPE ) 2; +#else // 0 *pxTopOfStack = ( portSTACK_TYPE ) 1; +#endif // 0 pxTopOfStack++; + /* Next the .tmpdata section. */ + for( ucBlock = GetTMPDATALen(), p = GetTMPDATAStrt(); ucBlock; ucBlock--, pxTopOfStack++, p++ ) + *pxTopOfStack = *p; + + /* Next the MATH_DATA section. */ + for( ucBlock = GetMATHDATALen(), p = GetMATHDATAStrt(); ucBlock; ucBlock--, pxTopOfStack++, p++ ) + *pxTopOfStack = *p; + return pxTopOfStack; } /*-----------------------------------------------------------*/
file: /Techref/member/IMB-yahoo-J86/port.c.diff.htm, 7KB, , updated: 2009/7/9 09:04, local time: 2024/12/22 19:03,
owner: IMB-yahoo-J86,
18.220.7.116:LOG IN
|
©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions? <A HREF="http://massmind.org/techref/member/IMB-yahoo-J86/port.c.diff.htm"> MATH_DATA & .tmp_data save/restore for FreeRTOS-port.c.diff</A> |
Did you find what you needed? |