please dont rip this site

NEW200210.TXT

 

ON 20021002@7:26:04 PM at page:
http://www.piclist.com/techref/quotes.htm
JMN-EFP-786 James Newton added 'Says

General Patton said "If everybody is thinking alike then
somebody isn't thinking"'

ON 20021012@3:17:18 AM at page:
http://www.piclist.com/techref/index.htm
radhikabhat13-indiatimes-    added 'Questions:

*I want the circuit diagram and other details about PIC programmer?

*I want information about ultrasonic sensors that can be interface to PIC (16F84)?
'



ON 20021012@9:39:31 PM at page:
http://www.piclist.com/techref/index.htm
JMN-EFP-786 James Newton added 'change

'

ON 20021012@9:43:11 PM at page:
http://www.piclist.com/techref/index.htm
JMN-EFP-786 James Newton edited the page

ON 20021012@9:44:38 PM at page:
http://www.piclist.com/techref/index.htm
JMN-EFP-786 James Newton edited the page

ON 20021014@12:43:14 AM at page:
http://www.piclist.com/techref/index.htm
NGS-EC-KA7 Nicolaas Gerhardus Scheepers added 'Questions:

Hi there,

I am having trouble with arithmetic in assembler. I want to do the following calculation.

          Y = ((X-Xmin)((Ymax-Ymin)/(Xmax-Xmin))) + Ymin

This is a formula to scale a point between Xmax and Xmin to a point between Ymax and Ymin. The Y points is 8-bit but the X points can be up to 16-bit values. You can already see my problem because I cannot get any 16-bit divided by 16-bit algorith or for that matter 24-bit divided by 16-bit that replies with the fractional part.

So I came up with the nexty formula to try and use a 16-bit divided by 8-bit number to give back fractions:

              Y = ((X-Xmin)(1/(Xmax-Xmin)/(Ymax-Ymin))) + Ymin

But it just gets more complex as I go along. My second problem is that say I work out the division and now I must multiply the answer (which is fractional , hoe the hell do you do it with the fractional part. Do you first multiply both numbers so they are integer and then divide it again later with the same number or what. Am I evenon the right track here or am I going bananas?

Please help me I am now three months into the game and have learned a lot in a short space of time but the learning just seems to grow and not level out, not that I am complaining just a remark:-)'



ON 20021022@12:14:46 AM at page:
http://www.piclist.com/techref/quotes.htm
JMN-EFP-786 James Newton added 'archive reference
http://www.piclist.org/techref/postbot.asp?by=time&id=piclist\2002\10\21\060506a
PICList post "<I>Something on the lighter side</I>"'

ON 20021031@2:19:33 AM at page:
http://www.piclist.org/techref/index.htm
krramu-indiatimes-    added 'Questions:

'


<P>
</BODY></HTML>

file: /Techref/new200210.txt, 2KB, , updated: 2002/10/31 17:24, local time: 2024/3/29 06:54,
TOP NEW HELP FIND: 
54.146.97.79:LOG IN

 ©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE!

<A HREF="http://massmind.org/techref/new200210.txt"> new200210</A>

Did you find what you needed?

 

Welcome to massmind.org!

 

Welcome to massmind.org!

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  .