please dont rip this site Prev Next

Arc info  Overview  Group

The Arc function draws an elliptical arc.

BOOL Arc(

    HDC hdc,

// handle to device context

    int nLeftRect,

// x-coordinate of bounding rectangle’s upper-left corner

    int nTopRect,

// y-coordinate of bounding rectangle’s upper-left corner

    int nRightRect,

// x-coordinate of bounding rectangle’s lower-right corner

    int nBottomRect,

// y-coordinate of bounding rectangle’s lower-right corner

    int nXStartArc,

// first radial ending point

    int nYStartArc,

// first radial ending point

    int nXEndArc,

// second radial ending point

    int nYEndArc 

// second radial ending point

   );

Parameters

hdc
Identifies the device context where drawing takes place.
nLeftRect
Specifies the logical x-coordinate of the upper-left corner of the bounding rectangle.

Windows 95: The sum of nLeftRect plus nRightRect must be less than 32768.

nTopRect
Specifies the logical y-coordinate of the upper-left corner of the bounding rectangle.

Windows 95: The sum of nTopRect plus nBottomRect must be less than 32768.

nRightRect
Specifies the logical x-coordinate of the lower-right corner of the bounding rectangle.

Windows 95: The sum of nLeftRect plus nRightRect must be less than 32768.

nBottomRect
Specifies the logical y-coordinate of the lower-right corner of the bounding rectangle.

Windows 95: The sum of nTopRect plus nBottomRect must be less than 32768.

nXStartArc
Specifies the logical x-coordinate of the ending point of the radial line defining the starting point of the arc.
nYStartArc
Specifies the logical y-coordinate of the ending point of the radial line defining the starting point of the arc.
nXEndArc
Specifies the logical x-coordinate of the ending point of the radial line defining the ending point of the arc.
nYEndArc
Specifies the logical y-coordinate of the ending point of the radial line defining the ending point of the arc.

Return Values

If the arc is drawn, the return value is nonzero.

If the arc is not drawn, the return value is zero. To get extended error information, call GetLastError.

Remarks

The points (nLeftRect, nTopRect) and (nRightRect, nBottomRect) specify the bounding rectangle. An ellipse formed by the specified bounding rectangle defines the curve of the arc. The arc extends in the current drawing direction from the point where it intersects the radial from the center of the bounding rectangle to the (nXStartArc, nYStartArc) point. The arc ends where it intersects the radial from the center of the bounding rectangle to the (nXEndArc, nYEndArc) point. If the starting point and ending point are the same, a complete ellipse is drawn.

The arc is drawn using the current pen; it is not filled.

The current position is neither used nor updated by Arc.

Windows 95: The drawing direction is always counterclockwise.

Windows NT: Use the GetArcDirection and SetArcDirection functions to get and set the current drawing direction for a device context. The default drawing direction is counterclockwise.

Windows 95: The sum of the coordinates of the bounding rectangle cannot exceed 32,767. The sum of nLeftRect and nRightRect or nTopRect and nBottomRect parameters cannot exceed 32,767.

See Also

AngleArc, ArcTo, Chord, Ellipse, GetArcDirection, Pie, SetArcDirection


file: /Techref/os/win/api/win32/func/src/f02_16.htm, 6KB, , updated: 2000/4/7 11:19, local time: 2024/11/5 13:45,
TOP NEW HELP FIND: 
3.145.98.196:LOG IN
©2024 PLEASE DON'T RIP! THIS SITE CLOSES OCT 28, 2024 SO LONG AND THANKS FOR ALL THE FISH!

 ©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE!

<A HREF="http://massmind.org/techref/os/win/api/win32/func/src/f02_16.htm"> Arc</A>

After you find an appropriate page, you are invited to your to this massmind site! (posts will be visible only to you before review) Just type a nice message (short messages are blocked as spam) in the box and press the Post button. (HTML welcomed, but not the <A tag: Instead, use the link box to link to another page. A tutorial is available Members can login to post directly, become page editors, and be credited for their posts.


Link? Put it here: 
if you want a response, please enter your email address: 
Attn spammers: All posts are reviewed before being made visible to anyone other than the poster.
Did you find what you needed?

 

Welcome to massmind.org!

 
Quick, Easy and CHEAP! RCL-1 RS232 Level Converter in a DB9 backshell
Ashley Roll has put together a really nice little unit here. Leave off the MAX232 and keep these handy for the few times you need true RS232!

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  .