please dont rip this site

Prev Next

CreateFileMapping info  Overview  Group

The CreateFileMapping function creates a named or unnamed file-mapping object for the specified file.

HANDLE CreateFileMapping(

    HANDLE hFile, // handle to file to map
    LPSECURITY_ATTRIBUTES lpFileMappingAttributes, // optional security attributes
    DWORD flProtect, // protection for mapping object
    DWORD dwMaximumSizeHigh, // high-order 32 bits of object size
    DWORD dwMaximumSizeLow, // low-order 32 bits of object size
    LPCTSTR lpName  // name of file-mapping object
   );

Parameters

hFile
Identifies the file from which to create a mapping object. The file must be opened with an access mode compatible with the protection flags specified by the flProtect parameter. It is recommended, though not required, that files you intend to map be opened for exclusive access.

If hFile is (HANDLE)0xFFFFFFFF, the calling process must also specify a mapping object size in the dwMaximumSizeHigh and dwMaximumSizeLow parameters. The function creates a file-mapping object of the specified size backed by the operating-system paging file rather than by a named file in the file system. The file-mapping object can be shared through duplication, through inheritance, or by name.

lpFileMappingAttributes
Pointer to a SECURITY_ATTRIBUTES structure that determines whether the returned handle can be inherited by child processes. If lpFileMappingAttributes is NULL, the handle cannot be inherited.

Windows NT: The lpSecurityDescriptor member of the structure specifies a security descriptor for the new file-mapping object. If lpFileMappingAttributes is NULL, the file-mapping object gets a default security descriptor.

Windows 95: The lpSecurityDescriptor member of the structure is ignored.

flProtect
Specifies the protection desired for the file view, when the file is mapped. This parameter can be one of the following values:

Value

Description

PAGE_READONLY Gives read-only access to the committed region of pages. An attempt to write to or execute the committed region results in an access violation. The file specified by the hFile parameter must have been created with GENERIC_READ access.
PAGE_READWRITE Gives read-write access to the committed region of pages. The file specified by hFile must have been created with GENERIC_READ and GENERIC_WRITE access.
PAGE_WRITECOPY Gives copy on write access to the committed region of pages. The files specified by the hFile parameter must have been created with GENERIC_READ and GENERIC_WRITE access.

In addition, an application can specify certain section attributes by combining (using the bitwise OR operator) one or more of the following section attribute values with one of the preceding page protection values:

Value

Description

SEC_COMMIT Allocates physical storage in memory or in the paging file on disk for all pages of a section. This is the default setting.
SEC_IMAGE The file specified for a section’s file mapping is an executable image file. Because the mapping information and file protection are taken from the image file, no other attributes are valid with SEC_IMAGE.
SEC_NOCACHE All pages of a section are to be set as non-cacheable. This attribute is intended for architectures requiring various locking structures to be in memory that is never fetched into the processor’s. On 80x86 and MIPS machines, using the cache for these structures only slows down the performance as the hardware keeps the caches coherent. Some device drivers require noncached data so that programs can write through to the physical memory. SEC_NOCACHE requires either the SEC_RESERVE or SEC_COMMIT to also be set.
SEC_RESERVE Reserves all pages of a section without allocating physical storage. The reserved range of pages cannot be used by any other allocation operations until it is released. Reserved pages can be committed in subsequent calls to the VirtualAlloc function. This attribute is valid only if the hFile parameter is (HANDLE)0xFFFFFFFF; that is, a file mapping object backed by the operating sytem paging file.
dwMaximumSizeHigh
Specifies the high-order 32 bits of the maximum size of the file-mapping object.
dwMaximumSizeLow
Specifies the low-order 32 bits of the maximum size of the file-mapping object. If this parameter and dwMaximumSizeHig are zero, the maximum size of the file-mapping object is equal to the current size of the file identified by hFile.
lpName
Points to a null-terminated string specifying the name of the mapping object. The name can contain any character except the backslash character (\).

If this parameter matches the name of an existing named mapping object, the function requests access to the mapping object with the protection specified by flProtect.

If this parameter is NULL, the mapping object is created without a name.

Return Values

If the function succeeds, the return value is a handle to the file-mapping object. If the object existed before the function call, the GetLastError function returns ERROR_ALREADY_EXISTS, and the return value is a valid handle to the existing file-mapping object (with its current size, not the new specified size. If the mapping object did not exist, GetLastError returns zero.

If the function fails, the return value is NULL. To get extended error information, call GetLastError.

Remarks

To use a memory-mapped file, you start by creating a memory-mapped file object. The act of creating an MMF object has very little impact on system resources. It does not affect your process's address space, and no virtual memory is allocated for the object (other than for the internal resources that are necessary in representing the object). One exception, however, is that, if the MMF object represents shared memory, an adequate portion of the system pagefile is reserved for use by the MMF during the creation of the object.

After a file-mapping object has been created, the size of the file must not exceed the size of the file-mapping object; if it does, not all of the file’s contents will be available for sharing.

If an application specifies a size for the file-mapping object that is larger than the size of the actual named file on disk, the file on disk is grown to match the specified size of the file-mapping object.

The handle that CreateFileMapping returns has full access to the new file-mapping object. It can be used with any function that requires a handle to a file-mapping object. File-mapping objects can be shared either through process creation, through handle duplication, or by name. For information on duplicating handles, see DuplicateHandle. For information on opening a file-mapping object by name, see OpenFileMapping.

Windows 95: File handles that have been used to create file-mapping objects must not be used in subsequent calls to file I/O functions, such as ReadFile and WriteFile. In general, if a file handle has been used in a successful call to the CreateFileMapping function, do not use that handle unless you first close the corresponding file-mapping object.

Creating a file-mapping object creates the potential for mapping a view of the file but does not map the view. The MapViewOfFile and MapViewOfFileEx functions map a view of a file into a process’s address space.

With one important exception, file views derived from a single file-mapping object are coherent, or identical, at a given time. If multiple processes have handles of the same file-mapping object, they see a coherent view of the data when they map a view of the file.

The exception has to do with remote files. Although CreateFileMapping works with remote files, it does not keep them coherent. For example, if two computers both map a file as writable, and both change the same page, each computer will only see its own writes to the page. When the data gets updated on the disk, it is not merged.

A mapped file and a file accessed by means of the input and output (I/O) functions (ReadFile and WriteFile) are not necessarily coherent.

To fully close a file mapping object, an application must unmap all mapped views of the file mapping object by calling UnmapViewOfFile, and close the file mapping object handle by calling CloseHandle. The order in which these functions are called does not matter. The call to UnmapViewOfFile is necessary because mapped views of a file mapping object maintain internal open handles to the object, and a file mapping object will not close until all open handles to it are closed.

Example

To implement a mapping-object creation function that fails if the object already exists, an application can use the following code.

hMap = CreateFileMapping(...); 

if (hMap != NULL && GetLastError() == ERROR_ALREADY_EXISTS) { 

    CloseHandle(hMap); 

    hMap = NULL; 

} 

return hMap; 

 

See Also

CloseHandle, DuplicateHandle, MapViewOfFile, MapViewOfFileEx, OpenFileMapping, ReadFile, SECURITY_ATTRIBUTES, UnmapViewOfFile, VirtualAlloc, WriteFile

See:

Comments:

See also:

Questions:


file: /Techref/os/win/api/win32/func/src/f09_11.htm, 14KB, , updated: 2011/1/22 04:59, local time: 2024/10/10 12:59,
TOP NEW HELP FIND: 
98.84.18.52:LOG IN
©2024 PLEASE DON'T RIP! THIS SITE CLOSES OCT 28, 2024 SO LONG AND THANKS FOR ALL THE FISH!

 ©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE!

<A HREF="http://massmind.org/techref/os/win/api/win32/func/src/f09_11.htm"> Windows Programming, CreateFileMapping</A>

After you find an appropriate page, you are invited to your to this massmind site! (posts will be visible only to you before review) Just type a nice message (short messages are blocked as spam) in the box and press the Post button. (HTML welcomed, but not the <A tag: Instead, use the link box to link to another page. A tutorial is available Members can login to post directly, become page editors, and be credited for their posts.


Link? Put it here: 
if you want a response, please enter your email address: 
Attn spammers: All posts are reviewed before being made visible to anyone other than the poster.
Did you find what you needed?

 

Welcome to massmind.org!

 

Welcome to massmind.org!

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  .