please dont rip this site
previous | start | next


FTYPE

Displays or modifies file types used in file extension associations

FTYPE [fileType[=[openCommandString]]]

  fileType  Specifies the file type examine or change
  openCommandString Specifies the open command to use when launching files
                    of this type.

Type FTYPE without parameters to display the current file types that
have open command strings defined.  FTYPE is invoked with just a file
type, it displays the current open command string for that file type.
Specify nothing for the open command string and the FTYPE command will
delete the open command string for the file type.  Within an open
command string %0 or %1 are substituted with the file name being
launched through the assocation.  %* gets all the parameters and %2
gets the 1st parameter, %4 the second, etc.  %~n gets all the remaining
parameters starting with the nth parameter, where n may be between 2 and 9,
inclusive.  For example:

    ASSOC .pl=PerlScript
    FTYPE PerlScript=perl.exe %1 %*

would allow you to invoke a Perl script as follows:

    script.pl 1 2 3

If you want to eliminate the need to type the extensions, then do the
following:

    set PATHEXT=.pl;%PATHEXT%

and the script could be invoked as follows:

    script 1 2 3

Back to the top of this page

 



previous | start | next

file: /Techref/os/win/winnt/slide34.htm, 2KB, , updated: 2004/5/26 14:03, local time: 2024/12/11 11:54,
TOP NEW HELP FIND: 
18.97.9.173:LOG IN

 ©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE!

<A HREF="http://massmind.org/techref/os/win/winnt/slide34.htm"> Help for all NT Version 4.0 commands</A>

After you find an appropriate page, you are invited to your to this massmind site! (posts will be visible only to you before review) Just type a nice message (short messages are blocked as spam) in the box and press the Post button. (HTML welcomed, but not the <A tag: Instead, use the link box to link to another page. A tutorial is available Members can login to post directly, become page editors, and be credited for their posts.


Link? Put it here: 
if you want a response, please enter your email address: 
Attn spammers: All posts are reviewed before being made visible to anyone other than the poster.
Did you find what you needed?

 

Welcome to massmind.org!

 

Welcome to massmind.org!

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  .