>
> I have a stepper chip that I need to ID, but I only have the pinout.
> It's had it's head sanded.. :-P
>
> 16 pin DIP
> Pin 1 is logic supply
> Pin 16 is motor supply
> Gnd on 4,5,12,13
>
> Outs on 6,8,9,11
> Phase ins on 3,14
> Phase enables on 2,15
>
> An output on 7,10, not sure what that's about.
>
> --
> http://www.piclist.com#nomail Going offline? Don't AutoReply us!
> email .....listservKILLspam@spam@mitvma.mit.edu with SET PICList DIGEST in the body