Post by thread:[EE] What type of socket/connector is this ?

The title says it all ; http://www.cellsay.com/Clkj_Images/upfile/Bigpic/20122412132614061.jpg It's a lcd panel from a Nokia cell phone and I need to do a breakout board for it. Any suggestions are welcomed

On 12/6/2012 4:45 PM, Yigit Turgut wrote: > The title says it all ; > > http://www.cellsay.com/Clkj_Images/upfile/Bigpic/20122412132614061.jpg > > It's a lcd panel from a Nokia cell phone and I need to do a breakout > board for it. Probably similar to mouser 798-DF23C10DS05V51 (also for a nokia LCD, but with less pins) -- Wouter van Ooijen -- ------------------------------------------- Van Ooijen Technische Informatica: http://www.voti.nl consultancy, development, PICmicro products docent Hogeschool van Utrecht: http://www.voti.nl/hvu C++ on uC blog: http://www.voti.nl/erblog

Em 12/6/2012 11:45, Yigit Turgut escreveu: > The title says it all ; > > http://www.cellsay.com/Clkj_Images/upfile/Bigpic/20122412132614061.jpg > > It's a lcd panel from a Nokia cell phone and I need to do a breakout > board for it. > > Any suggestions are welcomed. If the pitch is 0.5mm then it is a Hirose DF23C series. There is at least one Nokia LCD that uses a similar connector with pitch of 0.4mm. These seems to be unobtainable. Isaac