Post by thread:[OT]: Help: Identify Semiconductor firm from graph

Hi list, I have a problem: I have a broken SOIC PWM controller in a camera that has a type number and a strange symbol on it. I can't locate a spare so I submit the description of the symbol to the wisdom of the list: ------ -- \ \ / \ \ \ | | \ \ \ / ------------- -- \ \ \ \ \ \ ------- The ASCII drawing represents two rhombuses touching on the SE resp NW corners and a circle of diameter almost equal to one of the rhombuses heights, to the right of, and aligned in height with the upper rhombus. All three figures are solid filled. The rhombuses are figured exaggeratedly slanted in the ASCII picture, they are almost squares in reality, with very little slant. If anyone has seen or knows this symbol, and has a web site or an address for the firm or a distributor, then please say so. thank you in advance, Peter PS: Whoever came up with the idea of putting a logo w/o a name on anything while knowing that there is no visual/graphical search possibility yet should do something about it imho. Resigning would be a good start imho. -- http://www.piclist.com hint: To leave the PICList spam_OUTpiclist-unsubscribe-requestTakeThisOuTmitvma.mit.edu

Try http://www.elektronikforum.de/ic-id/ Richard. >> Hi list, >> I have a problem: I have a broken SOIC PWM controller in a camera that has >> a type number and a strange symbol on it. I can't locate a spare so I >> submit the description of the symbol to the wisdom of the list: >> ------ -- >> \ \ / \ >> \ \ | | >> \ \ \ / >> ------------- -- >> \ \ >> \ \ >> \ \ >> ------- >> The ASCII drawing represents two rhombuses touching on the SE resp NW >> corners and a circle of diameter almost equal to one of the rhombuses >> heights, to the right of, and aligned in height with the upper rhombus. >> All three figures are solid filled. The rhombuses are figured >> exaggeratedly slanted in the ASCII picture, they are almost squares in >> reality, with very little slant. >> If anyone has seen or knows this symbol, and has a web site or an address >> for the firm or a distributor, then please say so. >> thank you in advance, >> Peter >> PS: Whoever came up with the idea of putting a logo w/o a name on anything >> while knowing that there is no visual/graphical search possibility yet >> should do something about it imho. Resigning would be a good start imho. >> -- >> http://www.piclist.com hint: To leave the PICList >> piclist-unsubscribe-requestKILLspammitvma.mit.edu __________________________________________________________ The Mind Factory INC Richard Sloan (613) 825-4758 phone (613) 825-7758 fax .....rsloanKILLspam.....themindfactory.com * Custom MP3 Development * Custom Smart Cards * Electronic Manufacturing * Hardware/Firmware/Software Design * Schematic and PCB layout * ALL PRICES QUOTED IN USD UNLESS OTHERWISE NOTED -- http://www.piclist.com hint: To leave the PICList EraseMEpiclist-unsubscribe-requestspam_OUTTakeThisOuTmitvma.mit.edu

Do you see it here? http://www.elnec.com/ic_logos/ic_logos.htm Dale -- "Curiosity is the very basis of education and if you tell me that curiosity killed the cat, I say only the cat died nobly." - Arnold Edinborough -- http://www.piclist.com hint: PICList Posts must start with ONE topic: [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads

> I have a problem: I have a broken SOIC PWM controller in a camera that has > a type number and a strange symbol on it. I can't locate a spare so I > submit the description of the symbol to the wisdom of the list: [snip] > If anyone has seen or knows this symbol, and has a web site or an address > for the firm or a distributor, then please say so. > > thank you in advance, I've got a database on my hard drive that contains a few hundred logos - if you want me to put it on my website, let me know. If you're using Linux, you'll have to wait until I find a way to extract all the records from the database file and convert them into a more *nix friendly format. Later. -- Phil. philpemspam_OUTbigfoot.com http://www.philpem.f9.co.uk/ -- http://www.piclist.com hint: PICList Posts must start with ONE topic: [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads

Re: links and help. Thanks, the symbol is nowhere to be found. Philip Pemberton: Your database could be usefull, not just to me, so if you have the capability, why not put it up. I do not understand about 'converting to a *nix friendly format' ;-). I thought that the other camp had the problem with reading 'unknown file formats' ;-) (as in open with ... ?). many thanks, Peter -- http://www.piclist.com hint: The list server can filter out subtopics (like ads or off topics) for you. See http://www.piclist.com/#topics