Exact match. Not showing close matches.
PICList
Thread
'[PIC]: ICSP on 16F628'
2002\07\08@093311
by
John Walshe
Hi guys,
On the 16F628 the timer1 clock oscillator is sharing the pins RB6,7
with their programming function. Normally for ICSP we put some isolation
resistors in these lines if using them for general I/O. However if using the
oscillator with a watch Xtal will not these resistors upset the oscillator?
or without them will the xtal effect the programming signals.
Any experiences or advice?
John
--
http://www.piclist.com hint: The PICList is archived three different
ways. See http://www.piclist.com/#archives for details.
More... (looser matching)
- Last day of these posts
- In 2002
, 2003 only
- Today
- New search...