Post by thread:[SX] SX28AC/SS Programmer

In SX Microcontrollers, SX/B Compiler and SX-Key Tool, lionheart408 wrote:Hello all, this is my first time posting here. I just recently purchased the SX Tech starter kit which comes with the SX28AC/DPP, which I plan on using for testing purposes. But my main project will require a smaller chip i.e. the SS version of the SX28AC, so I was curious how I would go about programming it when I do purchase the SS chip. Is there an adapter that attaches to my tech board for teh different package type? or do I have to purchase anotehr protoboard for the SS chip? thnx for your replies.

---------- End of Message ---------- You can view the post on-line at: http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=88627 Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2005 (http://www.dotNetBB.com)

In SX Microcontrollers, SX/B Compiler and SX-Key Tool, bean wrote:Usually testing is done with the DIP version, then a "real" board is made with a programming header on it and the SS version is programming on the board. Bean.

---------- End of Message ---------- You can view the post on-line at: http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=88627#m88631 Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2005 (http://www.dotNetBB.com)

In SX Microcontrollers, SX/B Compiler and SX-Key Tool, lionheart408 wrote:Bean, thank you for your reply. I'm still kind of unclear...where do I get the programming header? will it still be usng the SX-key that came with my protoboard?

---------- End of Message ---------- You can view the post on-line at: http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=88627#m88637 Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2005 (http://www.dotNetBB.com)

In SX Microcontrollers, SX/B Compiler and SX-Key Tool, Forrest wrote:

The SX processor can be programmed in-circuit thru a 4 pin (0.100 inch spacing) header using the SX-Key. Here's an example of a product that uses the SX28 programmed in-circuit http://www.parallax.com/detail.asp?product_id=28099 ---------- End of Message ---------- You can view the post on-line at: http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=88627#m88683 Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2005 (http://www.dotNetBB.com)