'16C84 data eeprom and picstart16 help needed'
Please, some expert advice needed.
A friend of mine asked me to help him to program 2 16c84 (I'm only using 5x
types my self yet). The problem is that he need some data in the data eeprom
part that i don't understand how to program from my picstart16b.
I have seen in an application note that it is possible at least but could
it be done from my picstart16b?
While trying to program one of these i filled the buffer with zero's and
programmed it without complaints (except id i think) but when programming
it with real data there was errors already at pos 0x13. Could these little
bastards fail like this?
Sten Dahlgren CelsiusTech Systems ! "I'd rather have 39 Hp under my arm
S-175 88 Jaerfaella Sweden ! than one under my backside"
celsiustech.se +46-8 58084430 ! join your nearest karting club now !! seda
Jan Henrik Kraagtorp
Hello. I'm having just the same problem as you. I have the
picstart16b1 and I need software which is compatible with the
hardware from picstart16b1 and this software must be able to write to
the eeprom memory on the pic16c84 chip. If you get the solution to
this problem, please mail me. Or if you get the software that works
with the picstart16b1... or any info at all... please mail me.
PS! I got the program Promate 3000 which has support for the eeprom
programming, but I don't know for sure if it's compatible with the
picstart16b1 hardware device. But another 'but' is that this program
has an option called 'Download Firmware'..... So there is a
possibility that this could make the program compatible with the
hardware. I have sent email to Microchip about this, but I haven't
recived any answer from them........
Hope we could share some information on this.......
email:oleg.hiof.no & janhkstrutle.hiof.no & jhkfrodo.hiof.nojanhk
talk: same as email
" 640 kB should be enough for everyone " - Bill Gates
I was wondering where to get a PIC-START and aproximate prices (foriegn
prices are fine since I'm just considering right now what programmer to
Attachment converted: wonderlandtwo:WINMAIL.DAT (????/----) (000045E6)
At 14.32 1995-11-06 +0100, Jan Henrik Kraagtorp wrote:
>Hello. I'm having just the same problem as you. I have the
>picstart16b1 and I need software which is compatible with the
>hardware from picstart16b1 and this software must be able to write to
>the eeprom memory on the pic16c84 chip. If you get the solution to
I also has the picstart16b1 and I asked Memec Scandinavia (the distributor
in Sweden) about this six months ago. The only answer was that it was not
possible ... One solution however is to create a program that takes input
via RS232 and writes all eeprom locations in the 84. Of course you need another
"programmer" to accomplish this.
Erik Herman's RS-232 Programmer combined with Anniti Lucas's
PIP-02 program will permit writing to the EEPROM area. I often
use it to quickly change the sequence of a light chaser- and also
for many other purposes.
Sorry, I forgot Anitti's link, but it is listed on my web page
For quicker access to the PIC stuff, got to:
Rolan Yang http://hertz.njit.edu/~rxy5310 Electrical Engineer
VR,ROBOTICS,FENCING,HACKING,INDUSTRIAL MUSIC,ART,EXPLOSIVES,INLINE SKATING
THESE ARE A FEW OF MY FAVORITE THINGS.
4 out of 10 people are annoyed by ^ this.
More... (looser matching)
- Last day of these posts
- In 1995
, 1996 only
- New search...