Post by thread:DOS software for AN589 programmer ?

Hi ! I am using an AN589 Programmer with the PIP02 Software. Now i am locking for an programmer Software wich DOS command line interface. Is there such a program, maybe with Sourcecode? My intention is to use the programmer from within the CCS C Compiler IDE. I want to set the parallel port lines after programming to a state, releasing the reset line, so the program runs with the ISP cabel connected to the PIC board. Great Thanx ! St. PS.: I sent this question to the List a Week ago, but got no respond, so here my second mail. If you got this mail twice, please sorry ... -- __________________________________________________________ | _____________ | | Dipl.-Ing. Stefan M. Ranguelov /____________/| | | ||||||||||||| | | tel.: +49 (30) 20 181 251 | | priv.: +49 (30) 513 66 23 | | s-mail: D-10319 Berlin, Mellenseestr. 39/10 | | ------------------------------------------------------ | | e-mail: spam_OUTrangueloTakeThisOuTinformatik.hu-berlin.de | /) WWW: http://www.informatik.hu-berlin.de/~ranguelo (\ / ) PGP key: on request or from WWW-page ( \ _( (|__________________________________________________________|) ) /> (((\ \) /,) / ) / //))/ (\\\\ \_/ / \ \_/ ///// \ / \ / \ _/ \_ /

Stefan Ranguelov asked: > Now i am locking for an programmer Software wich > DOS command line interface. Is there such a program, > maybe with Sourcecode? It is relatively straightforward to make my own software work with the AN589 hardware. In fact, PICLIST contributor Mal Goris told me he had done just that. He may be persuaded to supply his source - are you listening Mal? Hiroaki Kobayashi has taken the C fragment presented in Application Note 589 and filled it out into a full program. You can find the source here: http://u2.alan.co.jp/~koba/pic/pgm84.c I've only had a quick look at this but one quirk is that it only loads the old INHX16 style hex files. Anyway, the source is there so you can fix that or not as you please. David -- http://www.man.ac.uk/~mbhstdj

FWIW, A friend of mine and I will be writing our own programming code for the YAPP serial port programmer. Our target platform is OS/2, but we will be making the source code as platform neutral as possible. If anyone else is interested we would be happy to share the source code when it is done. I will post here to let everyone know if and when it becomes available. I have chosen the YAPP because of the true RS232 serial port interface. This makes it much more of a portable device between operating systems. Yes, I know it is much slower to program a device over a 9600 baud RS232 port, but OTOH, I won't have to write a device driver for OS/2 ;-) On Wed, 25 Feb 1998 10:01:46 +0000, David Tait wrote: {Quote hidden}>Stefan Ranguelov asked: > >> Now i am locking for an programmer Software wich >> DOS command line interface. Is there such a program, >> maybe with Sourcecode? > >It is relatively straightforward to make my own software work with the >AN589 hardware. In fact, PICLIST contributor Mal Goris told me he had >done just that. He may be persuaded to supply his source - are you >listening Mal? > >Hiroaki Kobayashi has taken the C fragment presented in Application >Note 589 and filled it out into a full program. You can find the >source here: > >http://u2.alan.co.jp/~koba/pic/pgm84.c > >I've only had a quick look at this but one quirk is that it only >loads the old INHX16 style hex files. Anyway, the source is there >so you can fix that or not as you please. > >David >-- >http://www.man.ac.uk/~mbhstdj >