Post by thread:Just Starting with PICs

I am just starting on pic programming etc. I would like to know if anyone can tell me where to get a book on the code, and also, if anyone has the schematic for a pic programmer/reader. Thanks John P. Hollinghsead ]I[ KB5SXH President Texas Data Systems Pearland, TX spam_OUTavdealTakeThisOuThollingshead.com (713) 485-0394 Fax: (713) 485-8223

> I am just starting on pic programming etc. I would like to know if > anyone can tell me where to get a book on the code, and also, if > anyone has the schematic for a pic programmer/reader. > > Thanks > > John P. Hollinghsead ]I[ KB5SXH Welcome to the wonderful world of PIC programming. We hope you enjoy your ride. We offer many accessories for PIC programming. We can be accessed many ways: Parallax, Inc. 3805 Atherton Road #102 Rocklin, CA. 95765 USA Phone: (916)624-8333 Fax: (916)624-8003 FaxBack: (916)624-1869 BBS: (916)624-7101 (300-14400 baud,8 data bits,1 stop bit,no parity) e-mail: .....infoKILLspam@spam@parallaxinc.com ftp: ftp.parallaxinc.com www: http://www.parallaxinc.com Michael J. Robin Parallax Support

> I am just starting on pic programming etc. I would like to know if > anyone can tell me where to get a book on the code, and also, if > anyone has the schematic for a pic programmer/reader. > Thanks > John P. Hollinghsead ]I[ KB5SXH Grab a copy of my disk from the site below. It will give you full info on how to get the circuit, overlay and software for the 61-65, 71, 84, and 62x device programmer for free. Don... Low Cost DIY PCB's for PICs & COM1/LPT1 PC I/O Interface Kits ;! Don McKenzie. 29 Ellesmere Cres., Tullamarine. 3043 Australia ;@ Tel +61 3 9338 6286 Mobile +61 19 939 799 donmckKILLspamtbsa.com.au ;# Check My Promo Disk at http://rasi.lr.ttu.ee/~sis/mirror/don/ ;$ Type: 'finger .....donmckKILLspam.....tbsa.com.au|more' for more information.

Try my PIC page at http://www.lancs.ac.uk/people/cpaame/pic/pic.htm Andy ---------- From: Don McKenzie[SMTP:EraseMEdonmckspam_OUTTakeThisOuTTBSA.COM.AU] Sent: 10 November 1995 11:50 To: Multiple recipients of list PICLIST Subject: Re: Just Starting with PICs > I am just starting on pic programming etc. I would like to know if > anyone can tell me where to get a book on the code, and also, if > anyone has the schematic for a pic programmer/reader. > Thanks > John P. Hollinghsead ]I[ KB5SXH Grab a copy of my disk from the site below. It will give you full info on how to get the circuit, overlay and software for the 61-65, 71, 84, and 62x device programmer for free. Don... Low Cost DIY PCB's for PICs & COM1/LPT1 PC I/O Interface Kits ;! Don McKenzie. 29 Ellesmere Cres., Tullamarine. 3043 Australia ;@ Tel +61 3 9338 6286 Mobile +61 19 939 799 donmckspam_OUTtbsa.com.au ;# Check My Promo Disk at http://rasi.lr.ttu.ee/~sis/mirror/don/ ;$ Type: 'finger @spam@donmckKILLspamtbsa.com.au|more' for more information.