Post by thread:LCD water tight bezels supplier

To piclisters I am working on a counter project that will be used in a wash down environment. I need a way to either mount a LCD behind a watertight bezel or I need a watertight LCD assembly that could be mounted on or in a enclosure. I have not been able to locate a solution for this problem. Thanks in advance for your help. Jim Hutchison

This is commonly referred to a NEMA4 application. Several vendors, such as Hoffman, make this type of enclosure that can have a front window, or perhaps a clear lexan type of enclosure.

Calvin wrote: > Maybe you could try silicon based conformal coating (clear obviously). It is > water resistant. Never mix silicon with plastic. Plastic always loses. -- Friendly Regards Tjaart van der Walt spam_OUTtjaartTakeThisOuTwasp.co.za |--------------------------------------------------| | WASP International | |R&D Engineer : GSM peripheral services development| |--------------------------------------------------| |SMS .....tjaartKILLspam@spam@sms.wasp.co.za (160 chars max)| | http://www.wasp.co.za/~tjaart/index.html | |Voice: +27-(0)11-622-8686 Fax: +27-(0)11-622-8973| | WGS-84 : 26¡10.52'S 28¡06.19'E | |--------------------------------------------------|