'SimmStick New Boards.'
|During the month of May, DonTronics designed and produced 3 new PIC
based prototyping boards for the SimmStick(tm) platform and these boards
are shipping right now.
All I/O boards also suit the Atmel.001 (AT89C2051) SimmStick(tm) from
They should suit any future micro migration to the SimmStick building
DT003: Simmstick 4 slot mini-bus, power supply, and comms port with D-9
DT101: A PicStic(tm) equivalent circuit on a SimmStick(tm) platform.
PicStic(tm) versions 1, 2, and 3, all rolled up into one, plus a Max-232
and 24LCxx type EEprom. 1" module.
DT203: 24 LEDs, 4/8 switches on a SimmStick platform. 2" module. Uses 1
to 3 ULN2803's, 4 momentary switches, 8 link selected switches.
During the month of June, these will be released:
DT204: Expansion board for SimmStick Bus. 2" Module.
1) Can be used just to add 4 slots to a bus. The bus continues through.
2) Used as a right angle or left angle bus connection, so that you can
have a SimmStick facing up or down, or both.
3) Signal Isolation and cross connection using either links or DIP
4) Convert Simm connector to 30 pin Female.
DT205: Relay board for 4 relays. Carries a partial bus on to the next
module so that a total of 16 relays could be used by cascading four
boards. Uses SimmStick bus signals D0 to D15. Can select a group of 4
bits by placement of a single ULN2803 (or 2003) in one of four
positions. 4 monitor LEDs. Screw terminals for outputs. Suits many Relay
types. This is a 2.5 Inch board.
These can be viewed at:
These are all low cost, DSPT, Solder masked, silk screened quality PBCs.
I invite your inspection and comments.
Don McKenzie dontronics.com donhttp://www.dontronics.com
PICSTART and Newfound PIC Programmers Firmware Upgrades.
SLI, the serial LCD that auto detects baud rates from 100 to 125K bps.
SimmStick(tm) A PIC proto PCB the size of a 30 pin Simm Memory Module.
Send a blank message to dontronics.com for more details. info
More... (looser matching)
- Last day of these posts
- In 1997
, 1998 only
- New search...