please dont rip this site

BOB LCD Control Panel

The BOB makes a pretty good Arduino shield for an LCD Control Panel with switches, and ribbon cable connections to stepper motor drivers, space for a relay driver, etc.. Video of the build:

For the LCD panel, Install

For the switches, Install

For Motor Drivers (optional hack for attaching PMinMO compatible stepper or other drivers)

BOBLCDPanel.ino


#include <LiquidCrystal.h>

// See this page for the BOB Control Panel build
// http://www.massmind.org/techref/arduino-bob-panel.htm

#define LCD_COLS 16
#define LCD_ROWS 2

//#define MOTORS

#define S1_PIN 10
#define S2_PIN 11
#define S3_PIN 12
#define S4_PIN 13

#define X_DIR 6
#define X_STEP 2
#define Y_DIR 7
#define Y_STEP 3 // Shared with LCD RS
#define Z_DIR 8
#define Z_STEP 4
#define A_DIR 9
#define A_STEP 5 // Shared with LCD /E

// initialize the library with the numbers of the interface pins
LiquidCrystal lcd(3, 5, 6, 7, 8, 9);
//use this line instead if you patched C4 to JP4 (Z-STEP) instead.
//LiquidCrystal lcd(4, 5, 6, 7, 8, 9);

int switch_state() {
  int i=0;
  if (0==digitalRead(S1_PIN)) i+=1;
  if (0==digitalRead(S2_PIN)) i+=2;
  if (0==digitalRead(S3_PIN)) i+=4;
  if (0==digitalRead(S4_PIN)) i+=8;
  return i;
  }

void setup() {
  // setup the switch pins, with pullups
  pinMode(S1_PIN, INPUT_PULLUP);
  pinMode(S2_PIN, INPUT_PULLUP);
  pinMode(S3_PIN, INPUT_PULLUP);
  pinMode(S4_PIN, INPUT_PULLUP);

#ifdef MOTORS
  // setup the PWM or Step outputs
  pinMode(X_STEP, OUTPUT);
  pinMode(Y_STEP, OUTPUT);
  pinMode(Z_STEP, OUTPUT);
  pinMode(A_STEP, OUTPUT);
  // setup the Direction outputs
  pinMode(X_DIR, OUTPUT);
  pinMode(Y_DIR, OUTPUT);
  pinMode(Z_DIR, OUTPUT);
  pinMode(A_DIR, OUTPUT);
  // setup the A2 analog pin as an enable output.
  pinMode(A2, OUTPUT);
#endif

  // setup the LCD's number of columns and rows: 
  lcd.begin(LCD_COLS, LCD_ROWS);
  }

void loop() {
  // Print a message to the LCD.
  lcd.setCursor(0, 0);
  lcd.print("Hello World!    ");
  lcd.setCursor(0, 1);
  lcd.print("version 1.00    ");
  int s = switch_state();
  if (0 != s) { // switch was pushed
    lcd.setCursor(13, 1);
    lcd.print(s);
#ifdef MOTORS
    lcd.setCursor(0, 0);
    lcd.print("Motor running");
    lcd.print(s*(255/15));
    digitalWrite(A2,HIGH); //enable the motors.
    while (0 != s) {
      s = switch_state();
      analogWrite(X_DIR, s*(255/15)); //run the motor on X 0 to 255
      }
    digitalWrite(A2,LOW); //disable the motors.
#endif
    }
  delay(1000);
  lcd.setCursor(0, 0);
  lcd.print("                ");
  for(int i=0; i<LCD_COLS; i++) {
    lcd.setCursor(i, 0); //char i of line 0
    if ( i>10 ) lcd.print(i / 10); //divide by 10 gives upper digit, 
    //no decimal because int
    lcd.setCursor(i, 1); //char i of line 1
    lcd.print(i % 10); //modulo 10 gives lower digit
    delay(10);
    }
  delay(500);
  }



file: /Techref/arduino-bob-panel.htm, 4KB, , updated: 2017/3/24 15:41, local time: 2024/3/28 11:33,
TOP NEW HELP FIND: 
3.91.19.28:LOG IN

 ©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE!

<A HREF="http://massmind.org/Techref/arduino-bob-panel.htm"> BOB LCD Control Panel</A>

After you find an appropriate page, you are invited to your to this massmind site! (posts will be visible only to you before review) Just type a nice message (short messages are blocked as spam) in the box and press the Post button. (HTML welcomed, but not the <A tag: Instead, use the link box to link to another page. A tutorial is available Members can login to post directly, become page editors, and be credited for their posts.


Link? Put it here: 
if you want a response, please enter your email address: 
Attn spammers: All posts are reviewed before being made visible to anyone other than the poster.
Did you find what you needed?

 

Welcome to massmind.org!

 

Welcome to massmind.org!

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  .