roger_froud-virgin-

Code:

• Here's a handy little program that allows you to embed a string in your program which is accessed by the preceding call.
  In this case, it's used to write strings to an LCD display but the principle is useful elsewhere.
  The code was written for a 18F2480
  
  ;The string must be terminated by a null ie
  ;		CALL LCD_STR
  ;		DA "Hello",0
  ;On Exit,PC on stack points to next program instruction
  
  LCD_STR
  ;First copy address of string to program memory indirection pointer
  		MOVFF TOSU,TBLPTRU	;Upper word of stack pointer
  		MOVFF TOSH,TBLPTRH	;Middle
  		MOVFF TOSL,TBLPTRL		;Low
  NEXTCH	TBLRD*+			;Read next byte in string & increment pointer
  		MOVF TABLAT,W		;Get character
  		BZ ENDSTRG
  		LCD_CHAR_W		;Macro to write W to display
  		BRA NEXTCH
  ;This way to update return address to that following end of string null
  ENDSTRG	
  ;Beware, if the string is an even length, the return address with be invalid
  		INTERRUPTS_OFF		;Else screwy things can happen
  		BTFSC TBLPTRL,0		;Is return address odd?
  		TBLRD*+			;Increment pointer to end on an even address
  		MOVF TBLPTRL,W		;Low
  		MOVWF TOSL
  		MOVF TBLPTRH,W		;Mid
  		MOVWF TOSH
  		MOVF TBLPTRU,W		;Upper
  		MOVWF TOSU
  		INTERRUPTS_ON
  		RETURN

  +

James Newton of MassMind Says: " Nice! " +