please dont rip this site

TI MSP430 Microcontroller I2C

As far as we can tell, in the MSP430F543# line, the hardware I2C modes always consume more power than bit banged because they leave the lines pulling against the resistors far to long. Also, the trailing edge of the clock pulse is dangerously close to the change of the data line.

I2C Master Bit Banged code from Dan Bloomquist as posted to msp430@yahoogroups.com

file: /Techref/ti/msp430/iics.htm, 0KB, , updated: 2009/9/14 13:20, local time: 2024/12/27 01:22,
TOP NEW HELP FIND: 
13.58.191.60:LOG IN
 ©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE!

<A HREF="http://massmind.org/techref/ti/msp430/iics.htm"> TI MSP430 Microcontroller I2C</A>
After you find an appropriate page, you are invited to your to this massmind site! (posts will be visible only to you before review) Just type a nice message (short messages are blocked as spam) in the box and press the Post button. (HTML welcomed, but not the <A tag: Instead, use the link box to link to another page. A tutorial is available Members can login to post directly, become page editors, and be credited for their posts.


Link? Put it here: 
if you want a response, please enter your email address: 
Attn spammers: All posts are reviewed before being made visible to anyone other than the poster.
Did you find what you needed?
 

Welcome to massmind.org!

 

Welcome to massmind.org!

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  .